NEW MMO-Champion CPU Overclocking Leaderboards

[Cyanotical]

Crap I forgot. Hold on sir. >_<

---------- Post added 2012-02-07 at 08:25 AM ----------

Wow Cyanotical, one core at 64 Celsius, and one at 79! =S What the hell is up with that? lol

Added.

not entirely sure, i am using the cpu-370, which doesn't have a perfectly flat surface (curved), and the 3960x physically is a big chip, so it could be that some areas dont get the same coverage and cool faster then others, also, that was still with air in the lines, temps stay at about 60-65 under load now

[Deleted]

Name: Yakobo15
Processor: Intel Core i5-2500k
Clock: 4.33ghz
Voltage: On auto (went up to 1.4016 on coretemp during stress)
Cooler: Asetek 510LC
Screenshot LINK: http://i.imgur.com/t3tqt.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2236813

Motherboard (Gigabyte Z68P-DS3) has really odd voltage options...

[DeltrusDisc]

Name: Yakobo15
Processor: Intel Core i5-2500k
Clock: 4.33ghz
Voltage: On auto (went up to 1.4016 on coretemp during stress)
Cooler: Asetek 510LC
Screenshot LINK: http://i.imgur.com/t3tqt.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2236813

Motherboard (Gigabyte Z68P-DS3) has really odd voltage options...

Intriguing overclock, but it is verified! I'll put you down for 1.4v @4.33GHz.

---------- Post added 2012-02-08 at 02:28 PM ----------

That damn Sandy Bridge leaderboard is so bloody big compared to the others.... lol

[Demoness]

Intriguing overclock, but it is verified! I'll put you down for 1.4v @4.33GHz.

---------- Post added 2012-02-08 at 02:28 PM ----------

That damn Sandy Bridge leaderboard is so bloody big compared to the others.... lol

Sounds like an auto clock.

[DeltrusDisc]

Well meh. Auto-OCs aren't exactly not allowed, auto just typically doesn't handle over 4.3 too well, and especially over 4.5, that's why on these things you so rarely see purely auto-OCs.

Right now I'm running an auto-4.0GHz on my 2500K. ^_<

[Demoness]

Well meh. Auto-OCs aren't exactly not allowed, auto just typically doesn't handle over 4.3 too well, and especially over 4.5, that's why on these things you so rarely see purely auto-OCs.

Right now I'm running an auto-4.0GHz on my 2500K. ^_<

Oh I wasn't calling him/her out for an auto to be DQ, just stating that it looked auto because of the ridiculously high voltage.

[DeltrusDisc]

Could just be a crappy chip too. ;p I know what that's like, though I don't need 1.4v... >_<

[Deleted]

Name: Wadoo
Processor: 3930k
Clock: 4.7ghz
Voltage: 1.42v (in bios)
Cooler: H100
Screenshot LINK: http://i.imgur.com/sH04A.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2241276

[DeltrusDisc]

Added ya Wadoo.

Now Cyanotical will have to OC his more to take back #1!

[Cyanotical]

Added ya Wadoo.

Now Cyanotical will have to OC his more to take back #1!

http://i.imgur.com/QIM9z.jpg
http://valid.canardpc.com/show_oc.php?id=2241898

[Acquilae]

Processor: 3930k
Clock: 4.7ghz
Voltage: 1.45 in UEFI
Cooler: H100
Screenshot Link: http://i.imgur.com/L2yQ3.jpg
Valid CPU-Z Link: http://valid.canardpc.com/show_oc.php?id=2242412

I think the H100 can squeeze out 4.8GHz @ ~1.5v with a push/pull setup and I learn to use all the other voltage settings.

[Deleted]

Processor: 3930k
Clock: 4.7ghz
Voltage: 1.45 in UEFI
Cooler: H100
Screenshot Link: http://i.imgur.com/L2yQ3.jpg
Valid CPU-Z Link: http://valid.canardpc.com/show_oc.php?id=2242412

I think the H100 can squeeze out 4.8GHz @ ~1.5v with a push/pull setup and I learn to use all the other voltage settings.

http://www.overclock.net/t/1189242/s...9-overclockers

[DeltrusDisc]

http://i.imgur.com/QIM9z.jpg
http://valid.canardpc.com/show_oc.php?id=2241898

Follow proper posting rules! Also your CPU downclocked. hehe

---------- Post added 2012-02-10 at 10:42 PM ----------

Processor: 3930k
Clock: 4.7ghz
Voltage: 1.45 in UEFI
Cooler: H100
Screenshot Link: http://i.imgur.com/L2yQ3.jpg
Valid CPU-Z Link: http://valid.canardpc.com/show_oc.php?id=2242412

I think the H100 can squeeze out 4.8GHz @ ~1.5v with a push/pull setup and I learn to use all the other voltage settings.

hehe 3 SB-E posters and they're all bloody competitive.

[Cyanotical]

Follow proper posting rules! Also your CPU downclocked. hehe[COLOR="red"]

clocking that high with C1E and EIST enabled is harder then without, in fact i'm pretty sure i'll need to disable them to get past 5, so no picking on the throttling

[DeltrusDisc]

Please follow the following format otherwise your post will be ignored.

Name:
Processor:
Clock:
Voltage:
Cooler:
Screenshot LINK:
Valid CPU-Z link:

<3 This is what I was referring to, I was merely jesting about the downclock, which I look past, especially in the case of Sandy Bridge, because I know how much Sandy CPUs like to downclock.

Merely because I should not have to search your SS for the OC or have to check the CPU-Z link to see what you got it clocked at. I have these rules in place for everyone, even if you've already posted previously in the thread or for my best frands, just so no abuse happens and so when I hyperlink your place in the rankings, people can see who you are, voltage, clock, cooler, all that, right there. :P

[Cyanotical]

<3 This is what I was referring to, I was merely jesting about the downclock, which I look past, especially in the case of Sandy Bridge, because I know how much Sandy CPUs like to downclock.

Merely because I should not have to search your SS for the OC or have to check the CPU-Z link to see what you got it clocked at. I have these rules in place for everyone, even if you've already posted previously in the thread or for my best frands, just so no abuse happens and so when I hyperlink your place in the rankings, people can see who you are, voltage, clock, cooler, all that, right there. :P

so, you want everything up front so you don't have to search through a SS, yet you go through the SS to verify? :P

Name: Cyanotical
Processor: 3960x
Clock: 4.8Ghz
Voltage: 1.47
Cooler: Koolance CPU-370
Screenshot LINK: http://i.imgur.com/QIM9z.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2241898

note: EIST, C1E enabled, this clock was done completely from windows using AISuite, not from the BIOS

[DeltrusDisc]

hehe updated.

[Deleted]

Name: Wadoo
Processor: 3930
Clock: 4.9Ghz
Voltage: 1.47
Cooler: H100
Screenshot LINK: http://i.imgur.com/TtSJV.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2243083

Really don't think my thermal paste is spread or real temp is being gay as soon as a core hit 90c it dropped down to 75 1sec later

[DeltrusDisc]

ROFL look at the SB-E folks go!

[Acquilae]

http://www.overclock.net/t/1189242/s...9-overclockers

Wow thanks, that's way more helpful than the OC guide on ASUS' forums.