NEW MMO-Champion CPU Overclocking Leaderboards

[Deleted]

Nice OC there coolflame! Would love to see how some of the other 3570k's around here can shape up =]

Was running prime on my 2500k last night and thought I actually had it stable at last @ 4.9Ghz with 1.415v, but ended up crapping out after like 5 hours ^^

Will have to try again tonight

[noteworthynerd]

Name: noteworthynerd
Processor: Intel core i5 2500K
Clock: 4.6GHz
Voltage: 1.31V
Cooler: XSPC Rasa 750 RX240 (custom water cooling loop)
Screenshot LINK: http://i.imgur.com/ckzaP.png
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2362031

[Tonyman64]

Code:
Name:Tonyman64
Processor:I5 2500K
Clock:4.61 Gh
Voltage:1.368V
Cooler:CM Hyper 212 PLus
Screenshot LINK: http://i.imgur.com/j2uBx.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2365385

[DeltrusDisc]

Updating for coolflame, NWN, and Tonyman64! Welcome to the list folks and our first Ivy Bridge!

[Subbversion]

Name: coolflame
Processor: Intel Core i5 3570K Batch #3205C109
Clock: 4.9GHz
Voltage: 1.368V
Cooler: Corsair H100
Screenshot LINK: http://img215.imageshack.us/img215/2...0506192015.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2358189

I made it passed the 14hr mark in prime95, I am going to go until the last FFT (which happens at 17hrs 30min). I also did custom blend so that it would stress my ram as well for super stability. CPU-Z name is legends0 (my hwbot account), I can upload another later if you really need me to.

EDIT: All FFT's passed (18hrs prime95) http://cdn.overclock.net/f/f9/f90154...erstableib.png

Very nice, I have the same processor and can't wait to see what I'll get. Numbers like this make me not regret getting Ivy Bridge due to heat issues. Keep up the good work

[Drakoes]

OP, I was wondering if will you accept LinX for stability and stress testing? I've been using that a lot on my new i7-3770k and just wanted to make sure if you'll allow that program

[kidsafe]

Prime95 27.7 beta should be used on Sandy/Ivy from now on since it adds AVX compatibility. I know my 4.8-5.0GHz overclocks are running a lot hotter now with the new cruncher.

[Agamany]

OP i was wondering if you would consider running World Community Grid for stress testing... it does the same kind of thing as F@H i do believe... 100% cpu usage... if you need a link or any info about it just let me know.. and i can point you the right direction.

[Deleted]

Name: Resinderate
Processor: i5 2500k
Clock: 4.8GHz
Voltage: 1.405v
Cooler: H100 p/p
Screenshot LINK: http://i.imgur.com/GF6P2.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2368536

Validate time is during the prime run which I guess shows what it was running at ^^, realised I stopped prime before a SS.

Have been running 5GHz for a week without any problems (The most demanding thing I did with it was play BF3) , but this is the highest I can get it to being properly stable =]

[DeltrusDisc]

Updated. ^^

[Adappy]

Name: Adappy
Processor: i5 2500k
Clock: 5.0GHz
Voltage: ~1.45v (1.48V in the BIOS, LLC turned off)
Cooler: Custom water cooling
Screenshot LINK: http://i.imgur.com/ewfYx.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2381542

Edit again: got the screenshot with my name in it this time, with an 11 hour folding @ home run

[DeltrusDisc]

Added Adappy to the list! Grats on 5GHz dude!

[Adappy]

Ty ...wish it didn't take such a high voltage though. I know the "safe" limit is 1.52V w/o LLC, but I dunno how comfortable I am running 1.48V 24/7 (I'll most likely back it down a couple notches so I can lower the voltage, not like I'll notice 200MHz in day to day usage... I just wanted to say my chip can do 5Ghz )

[DeltrusDisc]

Don't we all?

And really, Diablo 3 doesn't need 5GHz, anyways. ;p

[nocturnus]

Name: coolflame
Processor: Intel Core i5 3570K Batch #3205C109
Clock: 4.9GHz
Voltage: 1.368V
Cooler: Corsair H100
Screenshot LINK: http://img215.imageshack.us/img215/2...0506192015.jpg
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2358189

I made it passed the 14hr mark in prime95, I am going to go until the last FFT (which happens at 17hrs 30min). I also did custom blend so that it would stress my ram as well for super stability. CPU-Z name is legends0 (my hwbot account), I can upload another later if you really need me to.

EDIT: All FFT's passed (18hrs prime95) http://cdn.overclock.net/f/f9/f90154...erstableib.png

Hi coldflame,

Did you also lower your PLL voltage? I'm running 4.8ghz on my i7 3770k @ 1.280volt at the moment. My temps are slightly higher than yours with my PLL voltage set to 1.5 (stock is 1.8).

I also use the H100 pushing out from up top with the stock fans. What is your H100 setup?

[kidsafe]

Official suggestion: Require Prime95 27.7 Beta or later for all new Sandy Bridge, Sandy Bridge E and Ivy Bridge submissions. The new version leverages AVX instructions and will prove most of our previous borderline OCs to be unstable.

http://www.mersenneforum.org/showthread.php?t=16779

[protput]

Name: Protput
Processor: i5-2500k
Clock: 4.5 Ghz
Voltage: 1.285v
Cooler: Corsair H100 with 2 Noctua NFP12's
Screenshot LINK: http://imgur.com/W3I39
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2382503

Intel burn test on maximum.

[Cyanotical]

Deltrus, you may have to change the IBT requirements for high amounts of ram, i get a BSOD indicating low dram voltage, even with the ram underclocked, i assume it has something with to with having 32GB

[Jiambi]

Name:Jiambi
Processor:I5-3570k
Clock:4.2Ghz
Voltage:1.100v
Cooler:Corsair H-100 stock TIM and fans
Screenshot LINK:http://img687.imageshack.us/img687/7131/42oc.png
Valid CPU-Z link:http://valid.canardpc.com/show_oc.php?id=2382713

This is what i could achieve w/o changing my voltages

Hmm, strange. It appears even though i had closed the program and it was not listed in my control panel under active processes/applications FoH was still up and running during the burn test. I noticed when I went to close my Task Manager and i noticed my CPU usage was still at 100%. Seems wierd especially since the program wasn't open /boggle

---------- Post added 2012-05-26 at 05:09 PM ----------

I guess disregard this. It passed IBT, folded over night, passed 8+ hours of prime but crashed when I tried closing diablo today. Got blue screened saying a core failed to respond in time. Tried running OCCT and got insta bsod with same message. Upping multiplier and going to use OCCT for testing. The others may not be reliable unless there is something else wrong.

[DeltrusDisc]

Official suggestion: Require Prime95 27.7 Beta or later for all new Sandy Bridge, Sandy Bridge E and Ivy Bridge submissions. The new version leverages AVX instructions and will prove most of our previous borderline OCs to be unstable.

http://www.mersenneforum.org/showthread.php?t=16779

Done, though I am hesitant with it being a beta. Will be watching this.

Deltrus, you may have to change the IBT requirements for high amounts of ram, i get a BSOD indicating low dram voltage, even with the ram underclocked, i assume it has something with to with having 32GB

I'll drop it to "high" but prefer maximum, but high will do. :P Just for you buddy. <3

@Protput, sorry, just saw your post now. Will add you in! Nice job getting 2500K@4.5GHz for only 1.285v, that's superb!

@Jiambi, upping multiplier? I would suggest tweaking the voltages, perhaps. O_o I do appreciate your honesty though! F@H might have just been minimized to the hidden icons section at the bottom right of your task bar. I'd check that, you have to actually be sure you pause/stop F@H before X'ing out.