Page 16 of 42 FirstFirst ...
6
14
15
16
17
18
26
... LastLast
  1. #301
    Sorry Deltrus. I just took a SS when the notice popped up and made sure the link was valid. I'll update in a few days once I get my OC higher. Thank you for taking the time to maintain this thread. It's interesting to see some different oc's and opinions.
    My new baby
    CPU: i5-3570k @4.1 Cooler: H-100 MoBo: Asrock Z77 Extreme 4 RAM: 16Gig Mushkin Blackline 1600 SSD: Crucial M4 128 HDD: WD Caviar Black 1TB GPU: MSI 7950 OC @ 925/1375 Case: CM Storm Trooper PSU: Seasonic X650 Gold

  2. #302
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    I'm stuck at 4.6 ghz :s Whenever I put it at 4.7 ghz and up the vcore, my screen just stays black, and I have to clear my CMOS every time.

    Does anyone know what's up?
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  3. #303
    I am Murloc! Xuvial's Avatar
    Join Date
    Apr 2010
    Location
    New Zealand
    Posts
    5,031
    ...screen just stays black? What, it won't even post? That can't be right.

  4. #304
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    Quote Originally Posted by Xuvial View Post
    ...screen just stays black? What, it won't even post? That can't be right.
    Yep, nothing happens. Just a black screen and a flashing monitor LED...
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  5. #305
    Might sound a bit obvious, but how much more voltage are you giving it?
    Intel i5 2500K (4.5 GHz) | Asus Z77 Sabertooth | 8GB Corsair Vengeance LP 1600MHz | Gigabyte Windforcex3 HD 7950 | Crucial M4 128GB | Asus Xonar DGX | Samson SR 850 | Zalman ZM-Mic1 | Western Digital Caviar Blue 500GB | Noctua NH-U12P SE2 | Fractal Design Arc Midi | Corsair HX650

    Tanking with the Blessing of Kings - The TankSpot Guide to the Protection Paladin - Updated for Patch 5.4!

  6. #306
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    Quote Originally Posted by Butler Log View Post
    Might sound a bit obvious, but how much more voltage are you giving it?
    4.6 was stable at 1.35 volts, 4.7 won't even boot at 1.45v
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  7. #307
    Fluffy Kitten Marest's Avatar
    Join Date
    Aug 2009
    Location
    Sweden
    Posts
    4,228
    1.45V is very high. Try 1.36 or 1.365 first. Go up 0.05 if not stable. I would try to boot with 1.35 first though.

  8. #308
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    Quote Originally Posted by Marest View Post
    1.45V is very high. Try 1.36 or 1.365 first. Go up 0.05 if not stable. I would try to boot with 1.35 first though.
    Nothing happens, black screen, doesn't post.
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  9. #309
    Brewmaster
    Join Date
    Mar 2009
    Location
    Hillsborough, CA
    Posts
    1,493
    Quote Originally Posted by protput View Post
    I'm stuck at 4.6 ghz :s Whenever I put it at 4.7 ghz and up the vcore, my screen just stays black, and I have to clear my CMOS every time.

    Does anyone know what's up?
    Is Internal PLL Overvoltage enabled?
    "Wrong. Deterrence deflects 100% of Iron Prison (Not tomb) dmg." -Jaydenkor, 2014


  10. #310
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    After messing around a bit more with the settings, I've reached 5.0 ghz at 1.390 volts. Boots to desktop easily, but can't get it stable. Bumped it all the way up to 1.44v, still not stable.

    Any tips? Should I be changing some more advanced settings?
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  11. #311
    The Insane DeltrusDisc's Avatar
    Join Date
    Aug 2009
    Location
    Illinois, USA
    Posts
    15,102
    Added Cyanotical and Marest, sorry for the delay guys.

    And as of right now, the following has been added to the first post, sorry to any who were planning on using it, but it is just causing too much unwanted drama, so I'll remove it altogether.

    INTELBURNTEST HAS BEEN REMOVED. ALL WHO USED IT IN THE PAST HAVE BEEN GRANDFATHERED IN, HOWEVER NO MORE ENTRIES WITH INTELBURNTEST WILL BE ACCEPTED.

  12. #312
    Brewmaster
    Join Date
    Mar 2009
    Location
    Hillsborough, CA
    Posts
    1,493
    Quote Originally Posted by protput View Post
    After messing around a bit more with the settings, I've reached 5.0 ghz at 1.390 volts. Boots to desktop easily, but can't get it stable. Bumped it all the way up to 1.44v, still not stable.

    Any tips? Should I be changing some more advanced settings?
    That sounds typical. There's no guarantee that you'll reach 5.0GHz at ~1.45V on a 2500K. I can only hit about 4.8GHz on my 2600K at that voltage w/HT. You could bump down your CPU PLL to 1.7 or even lower in an attempt to control temps. You could drop VCCIO to 1.0V as well Lowering your memory clockspeeds will almost always reduce your core temps as well since the adjacent memory controller won't have to work as hard. The issue here is temps aren't what kills your CPU overtime, but electron creep caused by the high voltage itself.

    Are C3/C6 states turned off?
    "Wrong. Deterrence deflects 100% of Iron Prison (Not tomb) dmg." -Jaydenkor, 2014


  13. #313
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616


    Let's see if we can get this stable, shall we?
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  14. #314
    The Insane DeltrusDisc's Avatar
    Join Date
    Aug 2009
    Location
    Illinois, USA
    Posts
    15,102
    Good luck...

  15. #315
    Name:Tonyman64
    Processor:I5 2500K
    Clock:4.71 Gh
    Voltage:1.392V
    Cooler:CM Hyper 212 PLus
    Screenshot LINK: http://i.imgur.com/ta7W9.jpg
    Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2401052
    Quote Originally Posted by Vanyali View Post
    Well, I want the freedom to put poison in food and sell it to anyone I want and call it sugar. It's my freedom to do so, so you can't tell me no.

  16. #316
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    5.1 ghz was a no go, 5.0 ghz on the other hand ^^

    Name: Protput
    Processor: i5 2500k
    Clock: 5.0ghz
    Voltage: 1.43v
    Cooler: H100 Push/Pull, 4 Noctua NF-P12 PWM's
    Screenshot link: running the test: http://imgur.com/Z7JYC Finished: http://imgur.com/l1VSi
    Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=2401262

    51.5% Overclock lawl...

    Hope you like my wallpaper, Disc!
    Last edited by protput; 2012-06-10 at 06:04 PM.
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  17. #317
    Hope you like my wallpaper, Disc!
    That is awesome protput
    Intel i5 2500K (4.5 GHz) | Asus Z77 Sabertooth | 8GB Corsair Vengeance LP 1600MHz | Gigabyte Windforcex3 HD 7950 | Crucial M4 128GB | Asus Xonar DGX | Samson SR 850 | Zalman ZM-Mic1 | Western Digital Caviar Blue 500GB | Noctua NH-U12P SE2 | Fractal Design Arc Midi | Corsair HX650

    Tanking with the Blessing of Kings - The TankSpot Guide to the Protection Paladin - Updated for Patch 5.4!

  18. #318
    Brewmaster
    Join Date
    Mar 2009
    Location
    Hillsborough, CA
    Posts
    1,493
    Do with this what you will, but OCCT = IBT = LinX = Linpack.
    "Wrong. Deterrence deflects 100% of Iron Prison (Not tomb) dmg." -Jaydenkor, 2014


  19. #319
    Mechagnome
    Join Date
    Aug 2011
    Location
    Netherlands
    Posts
    616
    Quote Originally Posted by kidsafe View Post
    Do with this what you will, but OCCT = IBT = LinX = Linpack.
    Folding isn't as thorough as prime either, and it's still on the list
    CPU: I5 2500K @4.5ghz (1.285v), CPU cooler: Corsair H100 push/pull GPU: MSI R7970 Lightning @1200Mhz, Case: Corsair 650D, Ram: 16GB Corsair vengeance, Mobo: Asrock Z77 Extreme4, PSU: Corsair TX650M, SSD: Samsung 830 128GB, HDD: WD Caviar Black 1TB SPU: Xonar Essence STX

  20. #320
    Brewmaster
    Join Date
    Mar 2009
    Location
    Hillsborough, CA
    Posts
    1,493
    Quote Originally Posted by protput View Post
    Folding isn't as thorough as prime either, and it's still on the list
    Oh I know, and agree. For the record I think the thread is fine the way it is since everybody is now subject to the same rules. I just wish people "in the know" would choose Prime95 27.7.
    Last edited by kidsafe; 2012-06-10 at 09:54 PM.
    "Wrong. Deterrence deflects 100% of Iron Prison (Not tomb) dmg." -Jaydenkor, 2014


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •