NEW MMO-Champion CPU Overclocking Leaderboards

[Maruka]

well i could also try to run naked die cooling if i mod my H100i stand-offs but that wouldn't matter since my cpu won't do anything at 5,1 or beyond stable no matter the voltage.
also delidding is pretty easy in hindsight with the proper approach. (don't do it with a razor it's risky as hell!)

Name: Shroudster
Processor: 3770k
Clock: +- 5,0 Ghz
Voltage: 1,376
Cooler: H100i
Screenshot LINK:
[IMG]http://i.imgur.com/sBs5s8cl.jpg[IMG]
Valid CPU-Z link: [url]http://valid.canardpc.com/2806416[url]

Even the razor method is hardly risky if you have a brain between your ears, i watched a 5 minute video and did it easily in 20 minutes. The TIM sure is bad under there, but another part of the issue is the glue they used lifts the spreader up a bit too i guess.

[Toffie]

You must admit that it's pretty damn pathetic that consumers have to split the CPU apart and reapply thermal paste because Intel can't be bothered to place it right with high quality thermal paste.... I can't wait to test Haswell, don't dissapoint me ! :P

[Deleted]

Too bad you didn't take the screenshot under load/with prime95 active.

and why should that matter?
can't make a ss under load and still see the timer on how long prime has been running.....

[Deleted]

and why should that matter?
can't make a ss under load and still see the timer on how long prime has been running.....

Some people will always find something to pick at for no apparent reason.

[Confined]

Too bad you can't read that Worker stopped after 8hours 5minutes with the max temps readable? Oo.

You must admit that it's pretty damn pathetic that consumers have to split the CPU apart and reapply thermal paste because Intel can't be bothered to place it right with high quality thermal paste.... I can't wait to test Haswell, don't dissapoint me ! :P

The problem isn't with the paste, The glue elevates the IHS a few mm thus not touching the die.

[DeltrusDisc]

and why should that matter?
can't make a ss under load and still see the timer on how long prime has been running.....

Oh yes you can.

If you have Prime showing each thing it completes, it will have the time on there, trust me. :P

http://i.imgur.com/N80bv.jpg

---------- Post added 2013-05-18 at 04:39 PM ----------

well i could also try to run naked die cooling if i mod my H100i stand-offs but that wouldn't matter since my cpu won't do anything at 5,1 or beyond stable no matter the voltage.
also delidding is pretty easy in hindsight with the proper approach. (don't do it with a razor it's risky as hell!)

Name: Shroudster
Processor: 3770k
Clock: +- 5,0 Ghz
Voltage: 1,376
Cooler: H100i
Screenshot LINK:
/img
Valid CPU-Z link: http://valid.canardpc.com/2806416

Not going to give you shit over it, but why not run your CPU at 100MHz BCLK? Or is it just some glitch that is out of your control?

Also, if you can't get 5.1GHz stable "no matter the voltage"... try turning on Internal PLL Overvoltage.

---------- Post added 2013-05-18 at 04:42 PM ----------

Well, congrats to Shroudster on being the new #1 and first 5GHz+ IB on our charts, you are the new standard! And the delidding certainly helped!

[Deleted]

spread spectrum enabled is more stable for me. (and allows for the lower voltage)
as for the prime thingy im lazy i wanna see the summary of how many tests in what time

edit: PLL overvoltage on from the start

[Jiambi]

Name: Jiambi
Processor: I5-3570k
Clock:4.5
Voltage:1.232
Cooler:H100 in push
Screenshot LINK:http://i.imgur.com/Hnvg5Eo.png?1
Valid CPU-Z link:http://valid.canardpc.com/2807135

when running stress test voltage was 1.232 steady but when validated with CPU-Z is reads 1.248 not sure why there is this discrepancy

[Faithh]

Name: Jiambi
Processor: I5-3570k
Clock:4.5
Voltage:1.232
Cooler:H100 in push
Screenshot LINK:http://i.imgur.com/Hnvg5Eo.png?1
Valid CPU-Z link:http://valid.canardpc.com/2807135

when running stress test voltage was 1.232 steady but when validated with CPU-Z is reads 1.248 not sure why there is this discrepancy

If deltrus would make a requirement that the bclk needs to be locked at 100,0000MHz then it would be really great :P

Yep complety normal when you validated the report things possibly your CPU was at idle then and during load you get a vdroop which can be tweaked with LLC.

[Jiambi]

hmm i have never messed with my bclk. I cant even explain why its not locked at 100. i am very sure i never changed it, its just always been that way with this mobo and figured a little fluctuation was normal or caused by some intel/asrock magic i didnt understand lol

[Confined]

Disable spread spectrum

[Jiambi]

it is disabled...or should be atleast

[DeltrusDisc]

Fluctuation is normal and okay. If you want to make sure it is always at 100.00, in the BIOS BCLK settings, type in 100.00.

At least, that is what I do.

Adding you now, Jiambi.

[chazus]

Fluctuation is normal and okay. If you want to make sure it is always at 100.00, in the BIOS BCLK settings, type in 100.00.

I did that at first, but it effectively uses more power since that is the same thing as disabling EIST.

[Faithh]

Name: Faithh
Stresstime: 8hours
CPU: i7 3930k
Clock: 4.6GHz
Voltage: 1.336V
Cooler: H100i + 2x NF-f12's
SS link: http://i.imgur.com/E0uNUfQ.png
Valid cpuz validation link: http://valid.canardpc.com/2831746

Still I haven't tried yet to go lower, 1.330V was just a random guess :P

[Helieos]

Name: Helieos
Processor: AMD FX-8350
Clock: 4.816GHz
Voltage: 1.475v
Cooler: NZXT Kraken x60 in Push/Pull configuration
Screenshot LINK: http://imgur.com/BiopTgl
Valid CPU-Z link: http://valid.canardpc.com/2842796

I am here to claim my crown among the fellow AMD users here.

[Deleted]

Before I run prime for 8 hours I just wanted to ask if this screenshot would be considered valid (if I had run prime for 8 hrs). Going to push for 5.1 or 5.2 ghz probably, this is my 24/7 OC:

Link

[DeltrusDisc]

Yup, that will do!

Faithh and Helieos I'll get to you both... soon™...

[n0cturnal]

Name: n0cturnal
Processor: i5 3570k
Clock: 4724MHz
Voltage: 1.272V
Cooler: Noctua NH-D14
Screenshot LINK: http://i.imgur.com/kBZM7tQ.png
Valid CPU-Z link: http://valid.canardpc.com/2849259

[DeltrusDisc]

Added all three of you to kick off my birthday. :P

It's 4AM here. >_>

Sorry for the delay, Faithh and Helieos!

Moved Intel Gulftown and the one CPU in its bracket to the bottom of the Intel section, and gave both AMD and Intel section headers, as well as adding an FX Piledriver section, finally!