MMO-Champion GPU (video card) Overclocking Leaderboards

[Deleted]

Okay. That is definitely an issue. Run a full 3DMark and just post it if you would.

3DMark 11 would be good too, we can see how that does then as well.

gonna check by rolling back to some older drivers. (disc ones instead of other ones)
+- 15min and i should have a decent 3dmark score.

[DeltrusDisc]

If it seems to be an issue inherently about Titans and 3DMark 2013 not working right, I can (for now) just say Titans need not do 3DMark 2013.

You could also just try lowering your clocks back down and see if it's an issue with heat/voltage. Speaking of which, what kinda temps have you been seeing?

[Deleted]

If it seems to be an issue inherently about Titans and 3DMark 2013 not working right, I can (for now) just say Titans need not do 3DMark 2013.

You could also just try lowering your clocks back down and see if it's an issue with heat/voltage. Speaking of which, what kinda temps have you been seeing?

mid 60's don't think i've touched the 70 degrees even lol xD (mighty impressed with the cooling so far)
and no way in hell im going to post stock results
it seems memory can't be oc'd much at all however , did manage to push core to 1201 when boost is active. (hovers just below that atm 1175 mostly)

[DeltrusDisc]

No problem with stock results, it could at least show whether the OC is not all that stable.

And I mean to post stock results just to see how stock handles 3DMark and if it downclocks as well or not.

I have reasons for everything I suggest, Shroud.

[Deleted]

No problem with stock results, it could at least show whether the OC is not all that stable.

And I mean to post stock results just to see how stock handles 3DMark and if it downclocks as well or not.

I have reasons for everything I suggest, Shroud.

no worries just a matter of time till i've found the right clocks. (found maximum stable core off-set already at +129 )
also got a somewhat stock result in the valley thread already that enough?

[DeltrusDisc]

To actually get on these boards, you need to use scores/pages from your GPU at the overclock you are reporting to us. :P Everyone follows the same rules. If an OC isn't stable, it isn't stable and cannot be up on the boards.

[Deleted]

To actually get on these boards, you need to use scores/pages from your GPU at the overclock you are reporting to us. :P Everyone follows the same rules. If an OC isn't stable, it isn't stable and cannot be up on the boards.

naturally have a full set of benches done tommorow evening since i gotta work. (ill just see if i can finish a 3dmark 11 before i hit the sack)

[Lemmiwink]

Oh, I was totally waiting for a 3DMark score. Are you using EVGA precision or MSI Afterburner?

[Deleted]

Oh, I was totally waiting for a 3DMark score. Are you using EVGA precision or MSI Afterburner?

evga precision.
well 3dmark 11 the programs just freezes after +- 10sec , gpu clocks do remain high though.
aah well guess ill have plenty tweaking to do for now.

[DeltrusDisc]

Hopefully NVidia will push a new driver soon that will fix your issues. =/

I wonder if having an actual Ivy Bridge CPU would aid at all, after all, your Titan as for now is in a PCI-E 2 16x slot.

[Deleted]

alright update for tonight.
managed valley + heaven with +122 on the core +452 on the mem. (valley was a 3030 score iirc)
3dmark11 > won't even recognize the card thus cannot test. (gonna try vantage after this 3dmark13 run)
3mark13 > working on running lower core off-set to see if it won't crap out. (+109) (getting device removed error just before or during firestrike on attempts before it, so either OC isn't stable enough or driver issue)
once i can fix a normal 3dmark13 score ill run the other ones officially etc for the ranking ofc. (fingers crossed that i can manage that tonight)

edit: how about this?

Name: Shroudster
GPU Brand Name: NVidia
GPU: GTX EVGA titan SC
Core Clock OC: 1188MHz
Memory Clock OC: 6902MHz
Voltage: 1.200v
Cooler: EVGA titan stock
Link to 3DMark 11 score: http://www.3dmark.com/3dm11/6200390?
Link to 3DMark 2013 score: http://www.3dmark.com/3dm/395204?
Link to SS of Unigine Heaven 4.0 or later results:
Link to SS of Unigine Valley 1.0 or later results:
Link to SS of Desktop: see valley image

[DeltrusDisc]

I'm going to give you the benefit of the doubt on the 3DMark reporting the core clocks incorrectly, Shroudster. Your score is still ahead of cards like the 7970, so maybe it's just because the GPU is still new. Congrats on our first Titan added!

---------- Post added 2013-03-17 at 03:52 PM ----------

I do wonder how it likes having a whole 1.2v being shoved through it.

[Deleted]

I'm going to give you the benefit of the doubt on the 3DMark reporting the core clocks incorrectly, Shroudster. Your score is still ahead of cards like the 7970, so maybe it's just because the GPU is still new. Congrats on our first Titan added!

---------- Post added 2013-03-17 at 03:52 PM ----------

I do wonder how it likes having a whole 1.2v being shoved through it.

max temp 71 degrees under load with that voltage so i don't worry about a thing tbh.
also did 3dmark ever report proper clocks? (same goes for valley ingame tool)

[DeltrusDisc]

Just because you have good temperatures doesn't mean you should push a certain voltage through a card.

Like for instance, 560 Ti's shouldn't really have more than 1.1v pushed through them, even if you have like a Twin Frozr II cooler on them like I do.

---------- Post added 2013-03-17 at 04:06 PM ----------

As for core clock reporting, this is correct.

http://www.3dmark.com/3dm11/2753251

[Deleted]

Just because you have good temperatures doesn't mean you should push a certain voltage through a card.

Like for instance, 560 Ti's shouldn't really have more than 1.1v pushed through them, even if you have like a Twin Frozr II cooler on them like I do.

---------- Post added 2013-03-17 at 04:06 PM ----------

As for core clock reporting, this is correct.

http://www.3dmark.com/3dm11/2753251

well yes and no regarding voltage. (usually too high voltage = bad temps, ofc there is a limit to what kind of voltage to sodomize a chip with)
perhaps 5xx series works fine , my 670 never showed proper clocks either and so far i haven't found a titan that did aswell.
also all those 3dmark scores makes me think of getting a 3930k..... lol (now that would be overkill for my needs)

[DeltrusDisc]

well yes and no regarding voltage. (usually too high voltage = bad temps, ofc there is a limit to what kind of voltage to sodomize a chip with)
perhaps 5xx series works fine , my 670 never showed proper clocks either and so far i haven't found a titan that did aswell.
also all those 3dmark scores makes me think of getting a 3930k..... lol (now that would be overkill for my needs)

Too high voltage only = bad temps if not cooled properly.

You must remember that 3DMark tests for more than just typical gaming stuff.

[Lemmiwink]

Reason for wrong clocks on Kepler cards is the "3 steps" from idle I believe. It's like 3DMark tells me my CPU is 1,6GHz while it really is 4.6GHz

[Deleted]

Too high voltage only = bad temps if not cooled properly.

You must remember that 3DMark tests for more than just typical gaming stuff.

true that.
quite interesting i ran the same clocks without the voltage tweak and i actually scored around 400 points higher in 3dmark. (k-boost not dropping likely but boost maximum is +-40 less on the core clock)
argh i wanna push my cpu to it's limit but i should do that AFTER my exams which are in two weeks QQ

[Toffie]

Name: Toffie
GPU Brand Name: AMD
GPU: AMD 7970 OC
Core Clock OC: 1275 MHz
Memory Clock OC: 7400 MHz
Voltage: 1.300v
Cooler: Gigabyte Windforce x3
Link to 3DMark 11 score: http://www.3dmark.com/3dm11/6260305
Link to 3DMark 2013 score: http://www.3dmark.com/3dm/434322
Link to SS of Unigine Heaven 4.0 or later results: http://i.imgur.com/Oa0JwbY.png
Link to SS of Unigine Valley 1.0 or later results: http://i.imgur.com/HL3rXBt.png
Link to SS of Desktop: http://i.imgur.com/9tqzSj9.jpg

[DeltrusDisc]

Name: Toffie
GPU Brand Name: AMD
GPU: AMD 7970 OC
Core Clock OC: 1275 MHz
Memory Clock OC: 7400 MHz
Voltage: 1.300v
Cooler: Gigabyte Windforce x3
Link to 3DMark 11 score: http://www.3dmark.com/3dm11/6260305
Link to 3DMark 2013 score: http://www.3dmark.com/3dm/434322
Link to SS of Unigine Heaven 4.0 or later results: http://i.imgur.com/Oa0JwbY.png
Link to SS of Unigine Valley 1.0 or later results: http://i.imgur.com/HL3rXBt.png
Link to SS of Desktop: http://i.imgur.com/mdXWF7R.jpg

Your names don't match up.