1. #1
    Deleted

    Cant find out my exact card model... (Eyefinity problem)

    Well im going to be running Eyefinity soon when i get a 3rd monitor...
    And i know that you need one monitor connected to your GPU via DP..
    So i forgot my 6870 connections and couldnt be bothered turning my case around to check. So i went on Sapphires website.

    The card cooler and pcb is clearly http://www.sapphiretech.com/presenta...n=&lid=1&leg=0
    But then i go and see the connections...

    --> http://eu2.sapphiretech.com/mc/image...80_600_600.jpg

    Thats clearly 2x DVI, 1x HDMI and 1x DP....

    But on my 6870 (checked back of case after all) theres 2x DVI, 1x HDMI and two MINI DP....
    Then i read about Sapphire FLEX. Which allows you to run Eyefinity without DP
    And apparently its only availible on Sapphire FLEX cards. For example --> http://www.sapphiretech.com/presenta...pid=1084&leg=0

    Now that card above has the exact same connections than my 6870... But im sure that my 6870 isnt a FLEX card. Even the cooler has white stripes while that flex one is blue.
    As you can see here http://www.jimms.fi/tuote/11179-09-20G my card has 2x DVI, 1x HDMI and two MINI DP right there.
    But on sapphires site the connections are different. Could it just not be updated on the Sapphire Site (http://www.sapphiretech.com/presenta...n=&lid=1&leg=0)

    Or is my 6870 FLEX compatible?
    Last edited by mmoc08e0cbb1c7; 2012-08-19 at 04:37 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •