Originally Posted by
Noctua
Mate... I've read your posts twice and i'm still confused as to what you're asking :P
Buut... as far as I know, with the H80 you plug your 2 fans (with 3 pin headers) into the CPU water block/pump thing, then you plug the pump's 4pin into the Mboards 4pin header - usually located above your cpu socket - wihtin an inch or so, and then you plug the waterblock's 3pin into the 3pin header - which should be right beside your 4 pin header.
if your ungodly massive 200mm fan has molex connectors - plug that into a molex connecter from your PSU.
Molex --> the archaic big 4 pins that are about the size of a match stick, and the head is about 1inch wide.