So my first ever build is complete.
Pictures for those interested (their shall be no back pictures, my cable management is a disgrace, even with cable tidies ^^'
http://i.imgur.com/SEne4.jpg Angle side on
Complete side on:
http://i.imgur.com/JqPos.jpg
Although I do have a few minor problems.
How can I tell if my usb 3.0 is working? It's transferring at 90mb/s with a usb 3 device in a usb 3 port. I was told it should be going about 5gb/s or something silly.
And the other thing is, my mobo has an 8 port for the cpu power. But my psu only had a 4 pin that fit (it should of had both supposedly).
I've already asked Saithes about this, he said it should be fine and that the psu should actually fit the 8 pins.
So I'm just curious, if anyone has a second opinion on why it doesn't fit?
The CPU port:
http://i.imgur.com/hqLXy.jpg, one half of the 8 pin fits.
The PSU plug in:
http://i.imgur.com/Bmmak.jpg that half is completely different to the other already plugged in.
But, even so, it's working and I'd like to give a big thanks to everyone who has helped me, especially Notarget and Saithes. Wouldn't of been possible without this community <3 thank you all so much ^^.