1. #4701
    Hi there
    Is it possible to add button modifiers to one of the parts of a castsequence?
    I'm trying to get the shaman weapon enchants, alchemist flask and regular flasks to a single button. A working version of this code

    /castsequence [mod:alt]Earthliving Weapon; [mod:shift]Frostbrand Weapon; [mod:ctrl]Rockbiter Weapon; [nomod] Flametongue Weapon , [mod:alt]Flask1;[nomod]Flask2

    Or any ideas about how to get weapon enchants and flasks in a button? Im ele/resto, so there is no left hand imbues..

    Thank you
    Last edited by henrytxin; 2013-07-21 at 12:24 PM.

  2. #4702
    Quote Originally Posted by ZaneBusby View Post
    Looking for a macro I can spam click without any negative repercussions that I can hit as soon as UVLS procs in Demo. I need it to interrupt my current cast, go into Metamorphosis, then use Doom, and every click from there forth will cast Doom without removing me from Metamorphosis form, until I manually take myself out of Meta, in which case the next time I click it it'll put me back into Meta and cast Doom again. If that makes sense. Also a nice addition would be having the tooltip show Doom whilst in Meta form, and show Meta while in caster form, if that's possible.

    Basically what I've got right now, which doesn't work, is this:

    #showtooltip
    /stopcasting
    /use Metamorphosis
    /use Doom

    It shows me the tooltip for Meta 100% of the time.
    First click: Stops my current cast (as intended), casts Meta, doesn't cast Doom
    Second click: If within 99 milliseconds of first click casts Doom. Else takes me straight back out of Meta and casts Corruption.
    Third click: Takes me out of Meta and casts Corruption.

    Iirc, the way to fix it taking me out of Meta is to put an exclamation mark at the start, which indicates to only go INTO meta, not take me out, but idr if that's right or not.

    Code:
    #showtooltip
    /stopcasting
    /use [form:0] Metamorphosis
    /use Doom

  3. #4703
    Code:
    #showtooltip
    /stopcasting
    /cast [form:1]Doom; Metamorphosis
    - - - Updated - - -

    Quote Originally Posted by henrytxin View Post
    Hi there
    Is it possible to add button modifiers to one of the parts of a castsequence?
    I'm trying to get the shaman weapon enchants, alchemist flask and regular flasks to a single button. A working version of this code

    /castsequence [mod:alt]Earthliving Weapon; [mod:shift]Frostbrand Weapon; [mod:ctrl]Rockbiter Weapon; [nomod] Flametongue Weapon , [mod:alt]Flask1;[nomod]Flask2

    Or any ideas about how to get weapon enchants and flasks in a button? Im ele/resto, so there is no left hand imbues..

    Thank you
    What about simply this:
    Code:
    #showtooltip
    /castsequence [mod:alt]Earthliving Weapon,Flask1; [mod:shift]Frostbrand Weapon; [mod:ctrl]Rockbiter Weapon; Flametongue Weapon,Flask2
    UI & AddOns expert | Interface & Macros moderator - My work

  4. #4704
    Hi, I'm new to macros and I'm wondering if there is a way to macro Heroic Leap into a single button, withough relying on the green landing target mark.

    I just want to program HL so that it automatically jumps the shortest distance foward.

    Thank you.

  5. #4705
    Not possible.
    UI & AddOns expert | Interface & Macros moderator - My work

  6. #4706
    Been trying to find an all in one macro for tiers of talents.

    Atm as a BrM I swap between different talents on tiers regularly. I would like a macro that changes based on the talent I have chose.

    For example.

    Level 90 talents Rushing Jade Wind and Invoke Xuen, the White Tiger.

    When swapping between these talents the tooltip will show the talent that is active and when pressed the macro will initiate the ability, but when I change to Rushing Jade Wind the tooltip will also change as well as making RJW the new active ability on keypress.

  7. #4707
    Quote Originally Posted by Protozoa7 View Post
    Been trying to find an all in one macro for tiers of talents.

    Atm as a BrM I swap between different talents on tiers regularly. I would like a macro that changes based on the talent I have chose.

    For example.

    Level 90 talents Rushing Jade Wind and Invoke Xuen, the White Tiger.

    When swapping between these talents the tooltip will show the talent that is active and when pressed the macro will initiate the ability, but when I change to Rushing Jade Wind the tooltip will also change as well as making RJW the new active ability on keypress.

    This cannot be done via a macro w/o quirks and issues with icons and tooltips. There is an addon that does this (as has been pointed out numerous times in this thread).

    http://www.wowinterface.com/download...ntMacroes.html

    - - - Updated - - -

    Quote Originally Posted by vacaoso View Post
    Hi, I'm new to macros and I'm wondering if there is a way to macro Heroic Leap into a single button, withough relying on the green landing target mark.

    I just want to program HL so that it automatically jumps the shortest distance foward.

    Thank you.
    There is no way for a macro to auto place a land targeted spell for you.

    - - - Updated - - -

    Quote Originally Posted by rageguy View Post
    It did not work The game says that my pet is dead. It's not wrong, the pet is dead, but if the macro worked it should start reviving,
    Add this to the beginning of your macro:

    Code:
    /run if UnitIsDead("pet")then PetDismiss()end

  8. #4708
    Quote Originally Posted by CodeConqueror View Post
    This cannot be done via a macro w/o quirks and issues with icons and tooltips.
    Actually, this should work pretty well: (Untested)
    Code:
    #showtooltip
    /use Rushing Jade Wind
    /use Invoke Xuen, the White Tiger
    /use Chi Torpedo
    /run local G=GetSpellInfo SetMacroSpell(GetRunningMacro(),G("Rushing Jade Wind")or G("Invoke Xuen, the White Tiger")or G("Chi Torpedo"))
    UI & AddOns expert | Interface & Macros moderator - My work

  9. #4709
    I'm looking, but cannot seem to locate a macro for my Enhance Shaman that will: Upon summoning my Fire Elemental...cycle through the abilities he uses...(fairly new to shaman...i think its 2 special ones he gets from the tier talent)

    Thanks in advance!

  10. #4710
    Hi, is it possible to write a stun- or interuptmacro that would first try to cast on my focus (without actually targeting the focus), and if the focus doesnt exist it would simply cast on my current target? I play as a Retri Paladin, if it matters.

    Thanks.
    I'm a little paladin short and stout,
    here is my hammer and here is my mount,
    when I see a Horde, I scream and shout,
    then I pop a bubble and hearthstone out

  11. #4711
    Code:
    /cast [@focus, harm, nodead][] Spell

    Feral Druid Maintainer of SimC // Moderator at Fluid Druid forums
    Pawkets' Armory
    // Pawkets' Pro Raiders // <Forgotten Aspects>

  12. #4712
    Quote Originally Posted by aggixx View Post
    Code:
    /cast [@focus, harm, nodead][] Spell
    Thank you!
    I'm a little paladin short and stout,
    here is my hammer and here is my mount,
    when I see a Horde, I scream and shout,
    then I pop a bubble and hearthstone out

  13. #4713
    Is it possible to make a macro with an ability then when I kill someone it emotes "you just got mugged!" ?

  14. #4714
    Hey I need a one button macro that will switch my buff to Inner Will if Inner Fire is active and Inner Fire if Inner Will is active.

    Thanks!
    http://www.wowarmory.com/character-s...cn=Revolutions


    BATTLEMASTER (After 3.3.5 nerf) REVOLUTIONS REPORTING IN.
    Wielder of The Scepter of Shifting Sands, Hand of Ragnaros, and Shadowmourne. Bringer of 66 minute kings.

  15. #4715
    Quote Originally Posted by Revolutions View Post
    Hey I need a one button macro that will switch my buff to Inner Will if Inner Fire is active and Inner Fire if Inner Will is active.

    Thanks!
    While you can't check if a buff is active or not, you can use a cast sequence macro like this:

    Code:
    #showtooltip
    /castsequence Inner Will, Inner Fire
    This will cast Inner Will on the first press and Inner Fire on the second press, then reset to Inner Will, etc.

    Or you can use a modifier macro:

    Code:
    #showtooltip
    /cast [mod] Inner Fire; Inner Will
    This will cast Inner fire when a modifier is held (alt, ctrl, shift) and Inner Will when no mod is held.

  16. #4716
    Quote Originally Posted by Treeston View Post
    Actually, this should work pretty well: (Untested)
    Code:
    #showtooltip
    /use Rushing Jade Wind
    /use Invoke Xuen, the White Tiger
    /use Chi Torpedo
    /run local G=GetSpellInfo SetMacroSpell(GetRunningMacro(),G("Rushing Jade Wind")or G("Invoke Xuen, the White Tiger")or G("Chi Torpedo"))
    As has been stated and tested many times in this thread, this method causes issues with tooltips and icons.

    This is the addon that does it for you without those issues and a detailed explanation why that macro has issues.

    http://www.wowinterface.com/download...entMacros.html

  17. #4717
    any chance for a macro that taunts a special named target?

    /cast [@name of npc, harm, nodead] Growl

    but i cant get anything to work with a named target. growl works just fine on focus target tho.

  18. #4718
    Quote Originally Posted by Fuzzyh View Post
    any chance for a macro that taunts a special named target?

    /cast [@name of npc, harm, nodead] Growl

    but i cant get anything to work with a named target. growl works just fine on focus target tho.
    @ only accepts unitIDs. You have to make it like this:

    Code:
    #showtooltip
    /cleartarget
    /tar <name of NPC>
    /cast Growl
    /targetlasttarget

  19. #4719
    fastest response ive ever had. works great thanks alot
    Quote Originally Posted by Squirl View Post
    @ only accepts unitIDs. You have to make it like this:

    Code:
    #showtooltip
    /cleartarget
    /tar <name of NPC>
    /cast Growl
    /targetlasttarget

  20. #4720
    I use this macro:

    #showtooltip
    /cast Mortal Coil
    /cast Howl of Terror

    For switching between the two talents. When I have Mortal Coil it does show the icon, but when I use Howl of Terror it displays a question mark. How can I make it show the Howl of Terror icon as well?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •