1. #4561
    Thanks esevenf but that won't work because I need my focus for wind shears

  2. #4562
    Quote Originally Posted by Anna234 View Post
    Hi. I'm a healer in 3s. I want to assist my mage everytime I cast damage spells. Basically I want to be able to have anything targetted but when I fire that macro it will cast lava burst on my mage's target and not lose my target. Is there something similar to like target=mymage'sname'starget?

    I don't want to /assist him because that would make me target the enemy and I don't want to target=targettarget because that means I have to target my mage first.

    Thanks ^.^
    If you can not use your buddy as a focus, then I guess you will need to change your target, but, fortunately, you can go back to your previous target effortlessly , like so

    /assist mage
    /cast Whatever spell and mods you want here
    /targetlasttarget

  3. #4563
    Quote Originally Posted by Anna234 View Post
    Thanks esevenf but that won't work because I need my focus for wind shears
    Ah well.

    The macro henrytxin posted should work fine though.

  4. #4564
    Quote Originally Posted by Anna234 View Post
    Hi. I'm a healer in 3s. I want to assist my mage everytime I cast damage spells. Basically I want to be able to have anything targetted but when I fire that macro it will cast lava burst on my mage's target and not lose my target. Is there something similar to like target=mymage'sname'starget?

    I don't want to /assist him because that would make me target the enemy and I don't want to target=targettarget because that means I have to target my mage first.

    Thanks ^.^
    Thanks esevenf but that won't work because I need my focus for wind shears
    I don't do arena, but perhaps you can use party#

    /cast [@party1target, harm] spell
    Last edited by ibnalail; 2013-05-08 at 03:38 AM.

  5. #4565
    You can go by name.
    Code:
    #showtooltip
    /cast [@magename-target, harm]Spell
    ('-target' instead of 'target' is used as a suffix for party member name pseudo-unitIDs)
    UI & AddOns expert | Interface & Macros moderator - My work

  6. #4566
    Treeston that worked perfect thx!

    i actually tried this out before at the dummies but didn't realise it had to be a party member for it to work.
    thanks again

  7. #4567
    Yeah, character names are only valid unitIDs for people in your party or raid.
    UI & AddOns expert | Interface & Macros moderator - My work

  8. #4568
    Hey, I'm pretty new to macros, so trying to get a better understanding of it through here!

    I'm looking for a holy prism macro that prioritizes like this:
    1. If my target of target is hostile, use on that.
    2. If not, cast on focus (if it exists).
    3. If no focus, cast on self.

    Sorry if it's been posted before, but reading through 220+ pages takes a while

    Thanks in advance!

  9. #4569
    Quote Originally Posted by Paddishar View Post
    Hey, I'm pretty new to macros, so trying to get a better understanding of it through here!

    I'm looking for a holy prism macro that prioritizes like this:
    1. If my target of target is hostile, use on that.
    2. If not, cast on focus (if it exists).
    3. If no focus, cast on self.

    Sorry if it's been posted before, but reading through 220+ pages takes a while

    Thanks in advance!
    Code:
    #showtooltip
    /use [@targettarget,harm][@focus,exists][@player] Holy Prism

  10. #4570
    Thanks, works like a charm

  11. #4571
    I was hoping someone could write a macro that will:
    1. Cast Crackling Jade Lightning on target
    2. Cast Crackling Jade Lightning on target's target
    3. Cast Crackling Jade Lightning on nearest enemy

    I've managed to get the 2 first right, but cant seem to get the last part right. I would love to post it, but it seems, since i am a new poster on mmo, i am not allowed to post the macro ive made so far

    Hopefully someone is able to help me! Thanks in advance!

  12. #4572
    Quote Originally Posted by Delacruz View Post
    I was hoping someone could write a macro that will:
    1. Cast Crackling Jade Lightning on target
    2. Cast Crackling Jade Lightning on target's target
    3. Cast Crackling Jade Lightning on nearest enemy

    I've managed to get the 2 first right, but cant seem to get the last part right. I would love to post it, but it seems, since i am a new poster on mmo, i am not allowed to post the macro ive made so far

    Hopefully someone is able to help me! Thanks in advance!
    There is not a UnitID for nearest enemy, but there is a targeting command for that.
    Have not tested, just off the top of my head. Likely a better way to do this if it even works.
    Should (I hope) target the nearest enemy player if you have no target, to prioritise players over pets/npcs.
    Should target the nearest generic enemy if you have no target, and then to cast Jade Lightning if you have hostile target.

    Put this starting on a new line after what you have so far.

    Code:
    /targetenemyplayer [noexists]
    /targetenemy [noexists]
    /cast [@target,harm] Crackling Jade Lightning
    Last edited by Treeston; 2013-05-10 at 08:55 AM. Reason: [noexist] -> [noexists]

  13. #4573
    Is there anyway to make a priority macro? Like : Shot A > Shot B. Shot A will always be fired if avaible?

    If not, is there a way to do a castsequence so I can bind two shots together?

    I want to fire Glaive Toss on CD and Arcane shot every other time

    So it would be: /castsequence Glaive Toss, Arcane Shot

  14. #4574
    Quote Originally Posted by Dvorjak View Post
    Is there anyway to make a priority macro? Like : Shot A > Shot B. Shot A will always be fired if avaible?

    If not, is there a way to do a castsequence so I can bind two shots together?

    I want to fire Glaive Toss on CD and Arcane shot every other time

    So it would be: /castsequence Glaive Toss, Arcane Shot
    There's not an efficient way to make a "priority" macro like this, I would advise against it.

    Gershuun @ Borean Tundra US - Interface & Macros Moderator

  15. #4575
    Quote Originally Posted by ComputerNerd View Post
    There is not a UnitID for nearest enemy, but there is a targeting command for that.
    Have not tested, just off the top of my head. Likely a better way to do this if it even works.
    Should (I hope) target the nearest enemy player if you have no target, to prioritise players over pets/npcs.
    Should target the nearest generic enemy if you have no target, and then to cast Jade Lightning if you have hostile target.

    Put this starting on a new line after what you have so far.
    <damn, that doesnt work

  16. #4576
    Quote Originally Posted by Delacruz View Post
    <damn, that doesnt work
    Try this:

    Code:
    /use [@target,harm][@targettarget,harm]Crackling Jade Lightning
    /cleartarget
    /targetenemy
    /use [@target,harm]Crackling Jade Lightning
    /targetlasttarget

  17. #4577
    Looking for an improved version of my void tendrils macro.
    tar void
    /castsequence Void Tendrils, Power Word: Shield
    /targetlasttarget
    tar void / targetlasttarget is obviously a hassle/supoptimal and I'm looking for a macro that pw shields my tendril without deselecting my current target.(and casts void tendrils in the first place)
    Last edited by Moriat; 2013-05-13 at 03:07 PM.

  18. #4578
    Hey I know this has probably been covered a million times, but I am having trouble with my shadow word: death macros. I have no problem getting a macro working to death my focus target, or previous target, or individual [arena1,2,3's] targets but I was wondering if it is at all possible to macro this spell to simply target ANY of the nearby enemy targets to get the cast off.

    The idea being so I can avoid having to use 3 modifying keys just to use SW on incoming cc, rather than having to use up a split second more of my time deciding which macro's hotkey I need to press in order to get the SW off in time to break, say, a polymorph. I have be encouraged to go with a mouseover macro, but I use my mouse to move, turn almost exclusively, so I dislike the idea of binding one of my most important spells to my cursor which is almost always invisible due to me using it to move.

    Honesty appreciated...

  19. #4579
    Quote Originally Posted by Guinthel View Post
    Hey I know this has probably been covered a million times, but I am having trouble with my shadow word: death macros. I have no problem getting a macro working to death my focus target, or previous target, or individual [arena1,2,3's] targets but I was wondering if it is at all possible to macro this spell to simply target ANY of the nearby enemy targets to get the cast off.
    Try this:
    Code:
    #showtooltip
    /cleartarget
    /targetenemy [noexists][dead][help]
    /cast Shadow Word: Death
    /targetlasttarget

    Gershuun @ Borean Tundra US - Interface & Macros Moderator

  20. #4580
    I got a question. Sometimes i play as resto druid and use big heal macro:

    #showtooltip Nature swiftness
    /cast Nature swiftness
    /cast Healing touch

    the problem is. since last patch it started to fail very frequently. i doubt that iam getting dispelled that fast, so is there a more stable version of that macro? Thanks
    my druid Retired
    my demon hunter Active
    my paladin Active

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •