1. #4561
    High Overlord madorable's Avatar
    Join Date
    Jun 2012
    Location
    Narnia, in your wardrobe watching you sleep
    Posts
    150
    Quote Originally Posted by Nonslid View Post
    Isnt there addons that do the same job? Thus saving all those macro slots.
    I know I got a macro slot problem, just to damn few of them :P
    There's an addon called Clique that can achieve the same thing, yea.

  2. #4562
    Hi. I'm a healer in 3s. I want to assist my mage everytime I cast damage spells. Basically I want to be able to have anything targetted but when I fire that macro it will cast lava burst on my mage's target and not lose my target. Is there something similar to like target=mymage'sname'starget?

    I don't want to /assist him because that would make me target the enemy and I don't want to target=targettarget because that means I have to target my mage first.

    Thanks ^.^

  3. #4563
    Set your mage as your focus and use:

    #showtooltip <spellname>
    /cast [@focustarget, harm] <spellname>

  4. #4564
    Thanks esevenf but that won't work because I need my focus for wind shears

  5. #4565
    Quote Originally Posted by Anna234 View Post
    Hi. I'm a healer in 3s. I want to assist my mage everytime I cast damage spells. Basically I want to be able to have anything targetted but when I fire that macro it will cast lava burst on my mage's target and not lose my target. Is there something similar to like target=mymage'sname'starget?

    I don't want to /assist him because that would make me target the enemy and I don't want to target=targettarget because that means I have to target my mage first.

    Thanks ^.^
    If you can not use your buddy as a focus, then I guess you will need to change your target, but, fortunately, you can go back to your previous target effortlessly , like so

    /assist mage
    /cast Whatever spell and mods you want here
    /targetlasttarget

  6. #4566
    Quote Originally Posted by Anna234 View Post
    Thanks esevenf but that won't work because I need my focus for wind shears
    Ah well.

    The macro henrytxin posted should work fine though.

  7. #4567
    Quote Originally Posted by Anna234 View Post
    Hi. I'm a healer in 3s. I want to assist my mage everytime I cast damage spells. Basically I want to be able to have anything targetted but when I fire that macro it will cast lava burst on my mage's target and not lose my target. Is there something similar to like target=mymage'sname'starget?

    I don't want to /assist him because that would make me target the enemy and I don't want to target=targettarget because that means I have to target my mage first.

    Thanks ^.^
    Thanks esevenf but that won't work because I need my focus for wind shears
    I don't do arena, but perhaps you can use party#

    /cast [@party1target, harm] spell
    Last edited by ibnalail; 2013-05-08 at 03:38 AM.

  8. #4568
    You can go by name.
    Code:
    #showtooltip
    /cast [@magename-target, harm]Spell
    ('-target' instead of 'target' is used as a suffix for party member name pseudo-unitIDs)
    UI & AddOns expert | Interface & Macros moderator - My work

  9. #4569
    Treeston that worked perfect thx!

    i actually tried this out before at the dummies but didn't realise it had to be a party member for it to work.
    thanks again

  10. #4570
    Yeah, character names are only valid unitIDs for people in your party or raid.
    UI & AddOns expert | Interface & Macros moderator - My work

  11. #4571
    Hey, I'm pretty new to macros, so trying to get a better understanding of it through here!

    I'm looking for a holy prism macro that prioritizes like this:
    1. If my target of target is hostile, use on that.
    2. If not, cast on focus (if it exists).
    3. If no focus, cast on self.

    Sorry if it's been posted before, but reading through 220+ pages takes a while

    Thanks in advance!

  12. #4572
    Quote Originally Posted by Paddishar View Post
    Hey, I'm pretty new to macros, so trying to get a better understanding of it through here!

    I'm looking for a holy prism macro that prioritizes like this:
    1. If my target of target is hostile, use on that.
    2. If not, cast on focus (if it exists).
    3. If no focus, cast on self.

    Sorry if it's been posted before, but reading through 220+ pages takes a while

    Thanks in advance!
    Code:
    #showtooltip
    /use [@targettarget,harm][@focus,exists][@player] Holy Prism

  13. #4573
    Thanks, works like a charm

  14. #4574
    I was hoping someone could write a macro that will:
    1. Cast Crackling Jade Lightning on target
    2. Cast Crackling Jade Lightning on target's target
    3. Cast Crackling Jade Lightning on nearest enemy

    I've managed to get the 2 first right, but cant seem to get the last part right. I would love to post it, but it seems, since i am a new poster on mmo, i am not allowed to post the macro ive made so far

    Hopefully someone is able to help me! Thanks in advance!

  15. #4575
    Quote Originally Posted by Delacruz View Post
    I was hoping someone could write a macro that will:
    1. Cast Crackling Jade Lightning on target
    2. Cast Crackling Jade Lightning on target's target
    3. Cast Crackling Jade Lightning on nearest enemy

    I've managed to get the 2 first right, but cant seem to get the last part right. I would love to post it, but it seems, since i am a new poster on mmo, i am not allowed to post the macro ive made so far

    Hopefully someone is able to help me! Thanks in advance!
    There is not a UnitID for nearest enemy, but there is a targeting command for that.
    Have not tested, just off the top of my head. Likely a better way to do this if it even works.
    Should (I hope) target the nearest enemy player if you have no target, to prioritise players over pets/npcs.
    Should target the nearest generic enemy if you have no target, and then to cast Jade Lightning if you have hostile target.

    Put this starting on a new line after what you have so far.

    Code:
    /targetenemyplayer [noexists]
    /targetenemy [noexists]
    /cast [@target,harm] Crackling Jade Lightning
    Last edited by Treeston; 2013-05-10 at 08:55 AM. Reason: [noexist] -> [noexists]

  16. #4576
    Mechagnome Dvorjak's Avatar
    Join Date
    Aug 2010
    Location
    Oregon
    Posts
    728
    Is there anyway to make a priority macro? Like : Shot A > Shot B. Shot A will always be fired if avaible?

    If not, is there a way to do a castsequence so I can bind two shots together?

    I want to fire Glaive Toss on CD and Arcane shot every other time

    So it would be: /castsequence Glaive Toss, Arcane Shot

  17. #4577
    Quote Originally Posted by Dvorjak View Post
    Is there anyway to make a priority macro? Like : Shot A > Shot B. Shot A will always be fired if avaible?

    If not, is there a way to do a castsequence so I can bind two shots together?

    I want to fire Glaive Toss on CD and Arcane shot every other time

    So it would be: /castsequence Glaive Toss, Arcane Shot
    There's not an efficient way to make a "priority" macro like this, I would advise against it.

    Gershuun @ Borean Tundra US - Interface & Macros Moderator

  18. #4578
    Quote Originally Posted by ComputerNerd View Post
    There is not a UnitID for nearest enemy, but there is a targeting command for that.
    Have not tested, just off the top of my head. Likely a better way to do this if it even works.
    Should (I hope) target the nearest enemy player if you have no target, to prioritise players over pets/npcs.
    Should target the nearest generic enemy if you have no target, and then to cast Jade Lightning if you have hostile target.

    Put this starting on a new line after what you have so far.
    <damn, that doesnt work

  19. #4579
    Quote Originally Posted by Delacruz View Post
    <damn, that doesnt work
    Try this:

    Code:
    /use [@target,harm][@targettarget,harm]Crackling Jade Lightning
    /cleartarget
    /targetenemy
    /use [@target,harm]Crackling Jade Lightning
    /targetlasttarget

  20. #4580
    Looking for an improved version of my void tendrils macro.
    tar void
    /castsequence Void Tendrils, Power Word: Shield
    /targetlasttarget
    tar void / targetlasttarget is obviously a hassle/supoptimal and I'm looking for a macro that pw shields my tendril without deselecting my current target.(and casts void tendrils in the first place)
    Last edited by Moriat; 2013-05-13 at 03:07 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •