1. #12101
    Herald of the Titans shroudster's Avatar
    Join Date
    Jul 2012
    Location
    netherlands
    Posts
    2,890
    Quote Originally Posted by Toffie View Post
    That is beyond seexy, just waiting for overclocking results
    those will need another week pretty much.
    currently got almost everthing installed. (naked die mounting kit had slightly too thick screws to be used )
    tommorow 1 hour of college and after that time for tubing, fixing the wires for the fans etc and filling it up
    after that work my ass of to make some school deadlines. (a must have source for a certain assignment won't be viewable untill the day before the due date )
    weekend family stuff due to birthday.

  2. #12102
    The Lightbringer Toffie's Avatar
    Join Date
    Oct 2009
    Location
    Denmark
    Posts
    3,762
    Quote Originally Posted by shroudster View Post
    those will need another week pretty much.
    currently got almost everthing installed. (naked die mounting kit had slightly too thick screws to be used )
    tommorow 1 hour of college and after that time for tubing, fixing the wires for the fans etc and filling it up
    after that work my ass of to make some school deadlines. (a must have source for a certain assignment won't be viewable untill the day before the due date )
    weekend family stuff due to birthday.
    Ah well, atleast it will be worth it. Pretty excited how much of a difference that die mounting will make though.
    4690K - MSI GTX 970 Twin Frozr V- Fractal Design 304 - Corsair CS550M - Gigabyte H97N
    Corsair Vengeance Pro 8GB - Samsung 840 250GB - | BenQ 24 XL2430T 144Hz |

  3. #12103
    Brewmaster looz's Avatar
    Join Date
    Nov 2010
    Location
    Finland
    Posts
    1,272
    Kreserb...

    I have the same chair, case, mousepad and headphones. Well, I used to have the chair until it broke.
    i5 4690k ♦ Z97-A ♦ GTX 760 SLI ♦ 8 GB ♦ 120Gb + 1Tb + 4Tb ♦ Define R4
    Muh Paladin

  4. #12104
    Pit Lord Jakexe's Avatar
    Join Date
    Apr 2010
    Location
    Australia
    Posts
    2,414
    Quote Originally Posted by shroudster View Post
    well this took me way more time then expected.
    however so far the result is very satisfying.
    *drool* Too bad they look bland compared to other blocks.

    Just out of interest how do the evga blocks perform, I recall reading the have relatively high resistence.
    i7 4790K @ 4.7GHz 1.35V || Asus Z97 Hero VII || EVGA GTX 980 Sli (x2) 1455Mhz || 16GB Corsair Vengence 2133mhz || 128GB+500GB SSD (PRO/EVO) || 2TB+4TB WD Blacks || Corsair HX-850W || Custom Water Cooling - xspc ex140 w/ noctua NF-A14 - xspc rx360 - xspc photon 270 w/ D5 - primochill acrylic tubing & ghost fittings -
    Corsair 900D || ASUS ROG Swift || Roccat Ryos MK Pro || Cyborg RAT7/Logitech G700s || BitFenix Recon Fan Controller

  5. #12105
    Herald of the Titans shroudster's Avatar
    Join Date
    Jul 2012
    Location
    netherlands
    Posts
    2,890




    holy crap this took way more time then expected but everything did go pretty smooth. (with the exception of minor leak @sli connector , hence the white stuff > velcro ftw)
    must say the clear tubing and nickel/black theme worked out pretty damm good looking compared to what i had in mind.

  6. #12106
    Elemental Lord Notarget's Avatar
    Join Date
    Feb 2010
    Location
    Dark Side of the Moon
    Posts
    8,017
    Damn them for not providing fully sleeved cables. Other than a few colors here and there it looks great! Can't really complain about the performance
    CPU: Intel i5-3570k (4.5GHz) MB: ASUS Z77 Sabertooth (uefi 2003)
    GPU: Asus 280X TOP (1130MHz/1750MHz) RAM: Corsair LP/LV white 8GB 1600MHz
    SSD: Samsung 840Pro 256GB + Crucial m4 128GB (040H) PSU: Seasonic 620M CASE: Corsair 500R (White/Black) Monitor: 1440p BenQ GW2765HT 1080p LG 237L-BN IPS
    Current build! ||Old Build || Bitdefender Total Security 2015 || AV-TEST 2014

  7. #12107

  8. #12108
    I am Murloc! Xuvial's Avatar
    Join Date
    Apr 2010
    Location
    New Zealand
    Posts
    5,068
    Yeah Seasonic is a bit sleeving-unfriendly, would've gone with a Corsair AX or something. It still looks completely kickass, I'm surprised that tube is able to sneak in from the top without kinking.
    Anyway the overclocks on those 780's is bound to be beastly...you going with modded bios for extra vcore on both?

  9. #12109

  10. #12110
    Or the supernova 1300/1000 G2/P2 from Evga. Has an efficiency of 90% at 100W load and 80% at 50W or even 70% for 22.5W which is amazing for such a big psu. http://uk.hardware.info/productinfo/...ab:testresults

    All other psu's from evga than the 1000/1300 ones aren't that great since they aren't made by Super flower.

  11. #12111

  12. #12112
    Herald of the Titans shroudster's Avatar
    Join Date
    Jul 2012
    Location
    netherlands
    Posts
    2,890
    1358/7114 on the core/mem rock solid atm at 1,3V
    managed some benches at 1397 on the core but need to tweak voltage for that more in order to keep it stable. (as in >1,35V)
    most i've seen so far was 900W peaks , then again haven't really tested it that extensive yet.
    can possible push past the 1000W once i start using the EVbot to raise the voltage. (so far the classified tool is enough)
    tubing was tricking then i expected it to be but it worked out pretty well. (i cheated a little with zip ties to prevent kinking on three spots)

  13. #12113
    I don't think you guys will have a hard time figuring out what I just got today.




  14. #12114
    I am Murloc! Xuvial's Avatar
    Join Date
    Apr 2010
    Location
    New Zealand
    Posts
    5,068
    Quote Originally Posted by shroudster View Post
    1358/7114 on the core/mem rock solid atm at 1,3V
    managed some benches at 1397 on the core but need to tweak voltage for that more in order to keep it stable. (as in >1,35V)
    most i've seen so far was 900W peaks , then again haven't really tested it that extensive yet.
    can possible push past the 1000W once i start using the EVbot to raise the voltage. (so far the classified tool is enough)
    tubing was tricking then i expected it to be but it worked out pretty well. (i cheated a little with zip ties to prevent kinking on three spots)
    1358/7114...that's like a 35-38% boost on ingame framerates (or benches) over stock, 1397mhz will be at least 40%+, not even kidding. Would recommend posting in OCN's Valley thread for high scores. Won't be able to beat the tri-sli/quadfire setups, but should be one of the best SLI scores.

    Quote Originally Posted by Drunkenvalley View Post
    I don't think you guys will have a hard time figuring out what I just got today.

    <snip>
    Let me guess, a Ducky Storm Trigger? Or is it a Logitech K90....

    Jokes, gratz on the K70 man
    Love dat texture on the WASD...
    Last edited by Xuvial; 2013-10-16 at 08:21 PM.

  15. #12115
    The Insane DeltrusDisc's Avatar
    Join Date
    Aug 2009
    Location
    Illinois, USA
    Posts
    15,626
    Quote Originally Posted by Xuvial View Post
    1358/7114...that's like a 35-38% boost on ingame framerates (or benches) over stock, 1397mhz will be at least 40%+, not even kidding. Would recommend posting in OCN's Valley thread for high scores. Won't be able to beat the tri-sli/quadfire setups, but should be one of the best SLI scores.


    Let me guess, a Ducky Storm Trigger? Or is it a Logitech K90....

    Jokes, gratz on the K70 man
    Love dat texture on the WASD...
    I'm pretty sure it is an IBM Model M.

  16. #12116
    Quote Originally Posted by DeltrusDisc View Post
    I'm pretty sure it is an IBM Model M.
    Nah, it's a Texas Instruments Speak and Spell.

  17. #12117
    TOTALLY NOT
    Banned
    tetrisGOAT's Avatar
    Join Date
    Jun 2008
    Location
    Sweden
    Posts
    13,207
    Although a bit of silliness is tolerated, I would not want this to completely derail* just because Drunkenvalley got a new microwave.

    On-topic, I highly dislike differently textured keys. Especially as an ESDF-user.
    As for sleeving in general, it often has the potential to be great, but I personally dislike the aesthetics of individual sleeving. Group-sleeving usually look amazing though, albeit rare. Corsairs standard all-black plastic is probably my preferred solution.
    As for Seasonic and sleeving, there are always extensions. My (obsessive perfectionistic) concerns about air flow is completely irrelevant in this particular Corsair case, both individual sleeving and the extra clutter behind the motherboard tray due to possible extensions.

    * = I'm not saying at all saying it is derailing, I'm just saying it in advance. No one should feel offended or reprimanded.

  18. #12118
    High Overlord
    Join Date
    Oct 2013
    Location
    norway
    Posts
    132
    seems like i cant post pics yet, but i will as soon as i can

    specs:'

    case: Corsair Obsidian 650D
    mb: ASUS Z87-DELUXE
    cpu: Intel i7-4770K
    mem: Corsair Vengeance Pro 1600MHz 16GB
    psu: Corsair AX 860i
    gpu: zotac gtx 780 amp sli
    storage: wd black 4 tb + samsung 840 pro 512 gb

  19. #12119
    The Lightbringer CheezusCrust's Avatar
    Join Date
    Feb 2011
    Location
    Nuuk, Greenland
    Posts
    3,350
    So I got a new table for my microwave

    Done through ~4 days with the little freetime I have with work, school & gaming, along with social activities.


    -

    -

    Before, took me ~3-4 hours to get it up and running again


    Been wanting to assemble the table for a few months, finally got the nerves to do it once a friend offered to help me assemble it. Also switched from wall-mounted to desk-mounted 3 monitor stand, getting 2x more Korean monitors next month

    More pictures here: http://imgur.com/a/mqhRU
    Last edited by CheezusCrust; 2013-10-17 at 02:22 AM.
    i5-4670k 4.2GHz | EVGA GTX 980 | 16GB Kingston HyperX | 256GB 840 EVO | Corsair H100i | Noctua IndustialPPC
    ASUS PB298Q 4K | 2x QNIX QH2710 | CM Storm Rapid w/ Reds | Steelseries Rival | Schiit Stack w/ Sennheiser HD8

  20. #12120
    High Overlord
    Join Date
    Oct 2013
    Location
    norway
    Posts
    132
    that is one hell of a setup you have there. what screens do you have ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •