H80 will fit in HAF 912?

[iplaytokill]

Hey guys,

so pretty much as the title says.. I'm thinking in get the H80 but i read somewhere that the radiator dosen't fit quite well at HAF 912. Any of you guys use both of them, or have any other case that is the same size of the 912?



Thanks

[TaintedOne]

I dont own either but I believe it will.

The rad is 120mmx152mmx38mm and stock fans are 120mmx120mmx25mm. So ruffly ~120mmx152mmx88mm

Just open the case and take some measurements to be sure

Side note: Corsair should include the tube length in there spec sheet =\ But I dont think that would be an issue with the 912.

[Deleted]

I managed to fit a H80 easily enough into a cooler master elite 430, that case looks even bigger than mine. But I would take some measurements just to be 100% sure

[Drunkenvalley]

Yes, the H80 will fit. Should at least. Why wouldn't it? What exactly would it collide with?
No, you don't want to mount the rad before the cpu block. I tried that. Was a pain.

[Wries]

It will be in conflict with the top 200mm 30mm thick fan. Err.. if you have one! Due to that the radiator is longer than a 120mm fan is.

You won't be able to run push/pull, perhaps not even fit a a single fan. I could only fit one fan on my Kühler 620, and that's a thinner radiator.

This is unless you remove the top fan, of course.

Switched to a Corsair 650D and stuff fits much better back there now.