1. #6521
    Hello Guys.
    I asked it already in a another tread, but maybe it's better suited here?

    I am looking for a Macro to not only change my spec, also to switch into my desired loadout of the spec i switch to.

    So if i run around in the open world as Devastation Evoker and get the invite into heal a M+ the macro should swap me into Preservation with the loadout M+, or if i want to change into my Raid Heal loadout, it should switch to Preservation and direct into my Raid loadout.

    I tryed some commands that Blizzard providet postet but i just dont get it working.
    I can change into the other spec but not directly into my desired loadout.

    Any way to get it done?

    Thank you!

  2. #6522
    Quote Originally Posted by bloodmoth13 View Post
    Why do castsequence macroes constantly break?
    I have /castsequence reset=15 primordial wave, lightning bolt and it constantly gets stuck on one spell or the other. its a pain in the ass tbh.
    Assuming you just want a button to spam lightning bolt while primordial wave is on cooldown, that macro is written incorrectly.

    Aside from that we don't know if you're using the necrolord ability or the talent.

    Also on a fundamental level your choice in using a macro like that will almost surely result in sub optimal damage.

  3. #6523
    Quote Originally Posted by Junseiyuri View Post
    Is it possible to add a modifier to also cast another spell to a known spell macro?
    Tried adding another line with cast mod but it didnt work

    This is my macro right now
    #showtooltip
    /cast [known:Dark Ascension] Dark Ascension; [known:Void Eruption] Void Eruption
    #showtooltip
    /cast [mod:key,known:spell] spell; [known:Dark Ascension] Dark Ascension; [known:Void Eruption] Void Eruption

    Replace key with alt, ctrl, or shift. Replace both instances of spell with the spell you want. In the future, when looking for macro help, you should share what spell you were trying to add and any attempts you tried to avoid any confusing answers like having to replace things in what I provided.

    - - - Updated - - -

    Quote Originally Posted by bloodmoth13 View Post
    Why do castsequence macroes constantly break?
    I have /castsequence reset=15 primordial wave, lightning bolt and it constantly gets stuck on one spell or the other. its a pain in the ass tbh.
    Cast sequence is usually not a one-button solution. The way your macro works is it will continue to try casting Primordial Wave until it is successful, then it will stick with Lightning Bolt for 15 seconds after that successful cast, whether or not you get to cast Lightning Bolt.
    Last edited by Kanegasi; 2022-11-24 at 06:59 PM.
    Originally Posted by Zarhym (Blue Tracker)
    this thread is a waste of internet

  4. #6524
    So i'm a lazy and also frequently impaired person that recently had the brilliant idea of playing an outlaw rogue.
    Now that's jolly good fun and all especially with the animacharged combo points making the system quite fun but it has too many abilities to comfortably bind imo.

    So: Is there a way to macro "Between the Eyes" and dispatch finishers so that the former is used whenever it is off cooldown and the latter whenever the former is on cooldown?
    In my laziness i had hoped it'd be implicit behaviour resulting from just putting the two in a single macro raw but alas.
    This is a signature of an ailing giant, boundless in pride, wit and strength.
    Yet also as humble as health and humor permit.

    Furthermore, I consider that Carthage Slam must be destroyed.

  5. #6525
    Hey guys, I'm having trouble with the new DF conditional macros. I'm trying to save some button bloat by combining talents but it's just not happening for me with a couple of tries. I am trying to make a simple one on my Warlock for Soulkeeper/Inquisitor's Gaze but not happening. If I have Soulkeeper talented it works perfectly and the tooltip changes, if I swap to Inquisitor's talen tooltip is default and pressing it does nothing.

    #showtooltip
    /use [@cursor][known:386256] Summon Soulkeeper;[known:386344] Inquisitor's Gaze

  6. #6526
    Quote Originally Posted by Daniie View Post
    Hey guys, I'm having trouble with the new DF conditional macros. I'm trying to save some button bloat by combining talents but it's just not happening for me with a couple of tries. I am trying to make a simple one on my Warlock for Soulkeeper/Inquisitor's Gaze but not happening. If I have Soulkeeper talented it works perfectly and the tooltip changes, if I swap to Inquisitor's talen tooltip is default and pressing it does nothing.

    #showtooltip
    /use [@cursor][known:386256] Summon Soulkeeper;[known:386344] Inquisitor's Gaze
    [@cursor,known:386256]

    Macro conditionals side-by-side in their own brackets work like "this OR this", so you have "cast @cursor OR if this spell known then cast". Separate them with a comma like I have above so that the logic is "cast @cursor AND if known".
    Originally Posted by Zarhym (Blue Tracker)
    this thread is a waste of internet

  7. #6527
    Quote Originally Posted by Kanegasi View Post
    [@cursor,known:386256]

    Macro conditionals side-by-side in their own brackets work like "this OR this", so you have "cast @cursor OR if this spell known then cast". Separate them with a comma like I have above so that the logic is "cast @cursor AND if known".
    Cheers for the reply, I tried this and whilst both versions work for the @cursor Gatekeeper, it's switching to Gaze and that not working on press that's still broken. Funny part is, this exact type of macro works on another talent set (Bombers @cursor / Demonic Strength) so it's simply something to do with the Gaze talent.

    I've tried both Spell ID from Wowhead and using an addon to pull it up as well as spell name but no joy.

    If anyone can get one working I would be eternally grateful. I have no more free binds to split them.

  8. #6528
    You could set it up to simply assume you're running Gaze if you're not running Soulkeeper.

    Code:
    #showtooltip
    /cast [@cursor,known:386256] Summon Soulkeeper; Inquisitor's Gaze
    If that doesn't work then either you don't have the macro on the bar when you switch to Gaze or we need more info about what's actually happening.
    Does the icon change to a question mark?
    Does the icon change to Gaze but pressing it doesn't work?
    Does the icon change to Gaze but clicking it doesn't work?
    What keybind is it on, and does it overlap with your Self Cast Key?
    ...something else
    Last edited by Elvenbane; 2022-11-25 at 03:14 PM.

  9. #6529
    Quote Originally Posted by Elvenbane View Post
    You could set it up to simply assume you're running Gaze if you're not running Soulkeeper.

    Code:
    #showtooltip
    /cast [@cursor,known:386256] Summon Soulkeeper; Inquisitor's Gaze
    If that doesn't work then either you don't have the macro on the bar when you switch to Gaze or we need more info about what's actually happening.
    Does the icon change to a question mark?
    Does the icon change to Gaze but pressing it doesn't work?
    Does the icon change to Gaze but clicking it doesn't work?
    What keybind is it on, and does it overlap with your Self Cast Key?
    ...something else
    Lifesaver, the macro you linked worked. I wonder why it doesn't work when you try and use a known conditional to both parts? There was nothing special about the macro compared to my Bombers/Demonic Strength one that worked perfectly except for ID's and spell names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •