CPU i7-3770K @4,6.
RAM Kingston DDR3 HyperX 1600MHz 16GB
SSD Crucial m4 SSD 2.5" 128GB os goes here
HDD Seagate Barracuda® 1TB storage
GPU ASUS GeForce GTX670 4GB DCII PCI-E
Mobo MSI Z77A-G43, Socket-1155
Samsung DVD±RW SH-224BB/BEBE SATA BLACK
Corsair Cooling Hydro H60 CPU K
PSU Corsair CX V2 600W PSU
CASE CM Storm Trooper Gaming Big Tower
Mouse- razer lachesis
keyboard- logitech g110
Headset- razer megalodon
speakers- no idea, brother gave it to me.
monitors- AOC 27" LED e2795Vh and Benq xl2411t.
pictures are a bit bright though
Blue parts on a mobo when the LEDs in the case are red. How pro isn't that?
I seriously have no idea how to do proper thumbnails >_>
Last edited by Scrubity; 2013-05-14 at 11:11 AM.
I do wish they would do away with brown PCBs already :/
Have you tried routing the PCI-E cables to the GPU through the lower grommet? you'd see less of them, and because of the viewing angle the weave of the cable sleeving would make appear more opaque.
Last edited by Hulari; 2013-05-16 at 03:12 PM.
While fans do differ in noise levels depending on RPM, their differences are somewhat moot if you plug them directly into the PSU because they'll be blasting away at 12v. Even motherboard headers tend to default to max RPM or have shoddy voltage control.
You made a good decision to buy a fan controller, especially one which allows you to turn fans off completely. Very handy!
My own rig is is full of Corsair AF/SP fans but I still wouldn't run them at stock speeds despite them being the quiet editions...but then again, I have pretty crazy standards when it comes to what "quiet" means :S
Last edited by Xuvial; 2013-05-16 at 05:57 PM.
WoW Character: Wintel - Frostmourne (OCE)
Gaming rig: i7 7700K, GTX 1080 Ti, 16GB DDR4, BenQ 144hz 1440p
Signature art courtesy of Blitzkatze
WoW Character: Wintel - Frostmourne (OCE)
Gaming rig: i7 7700K, GTX 1080 Ti, 16GB DDR4, BenQ 144hz 1440p
Signature art courtesy of Blitzkatze
Looks like it will be another 10-15 days or so before the 900D arrives and I can start putting together my watercooling loop so I did a little touch up on the Switch810. Thinking this is kinda the theme I will be going for in the 900D as well, only CPU and GPU will have a waterblock on them and I will use the FusionThermo on the MB.
Let me know what you think about my color theme etc. Blocks I will be using are: EK-FC GTX Titan XXL incl. backplate and EK Supremacy Acetal Nickel
i expect the red ones to go faster
looks pretty nifty only shame on the green of the titan that kinda looks out of place.
Maybe you could paint over it? Should work quite well if you are just careful.
I can't say for sure because I don't own one but it's most likely white leds shining trough plastic painted green. If you repainted it red it should glow red? Even if it lost some of the "glow" in the process and only looked red it would still look better, in my opinion.
Sweet looking build nonetheless, Lemmiwink!