Post your gaming setup!

[DeltrusDisc]

I think we can put shroudster in the enthausiast department, so he probably doesnt really care about the performance increases And I get why you want to change to different 780s when you are considering to make a custom watercool setup.

Do consider Saithes' post. It's very very possible Shroudster is at the end of the safe voltage limits. He could be on the edge of outright killing the cards if he tries anything more.

[Deleted]

Do consider Saithes' post. It's very very possible Shroudster is at the end of the safe voltage limits. He could be on the edge of outright killing the cards if he tries anything more.

If they are hardcapped, that probably still means 1.212 is still a "safe" voltage for the cards. Otherwise Nvidia would have put that voltage lower.

But hes changing them mostly because of the waterblocks.

[Majesticii]

-removed due to double post-

[Deleted]

I think it'd look cleaner if you put the rad first, and then the fan.

[Deleted]

Majesticii, which case is that?

[Majesticii]

I think it'd look cleaner if you put the rad first, and then the fan.

Maybe, instructions said to put it like this though. Also little more tricky because the threads are on the actual radiator.
Edit; nevermind, i found the extra set or screws to do that with.

Majesticii, which case is that?

Corsair 350D

[Butler to Baby Sloths]

Think its a corsair 350D

[Deleted]

Looks really good Majesticii. Looking forward to better pictures that will do the build justice.

You should keep the fan in pull to be honest (I assume that's how you've got it atm). It makes it a lot easier to clean and the performance (cooling) between push and pull is negligible. You could add a fan shroud if you really want the extra cooling performance.

I like the sleeving too; good job! If I had to nit-pick it would be the colour-coded PSU connectors. Dismantle them and spray-paint them black or white!

[adamo696]

Halfway through my build ATM but i have it running.

Case: CM Storm Stryker - 3x120mm stock fans - 200mm fan removed for radiator - 2x Corsair AF120 HP's
CPU: i7 4770k @ stock (oc 2moro when im not tired :P)
CPU Cooler: Corsair H100i with 2x Noctua NF12's attached.
MoBo: ASUS Maximus VI Hero ROG
RAM: Corsair Vengeance Pro 16gb 2400mhz - 2 x 8gb
PSU: Cooler Master Silent Pro Hybrid 850 Watt
GPU: Sapphire HD5770 -upgrading to- EVGA GTX780 SC ACX eventually SLI
Storage: Seagate 1.5TB -will be adding- samsung 840 250gb ssd & 2tb WD green

Peripherals: Razer Carcharias / Deathadder / Tarantula - Acer 23" OLLLLLLD monitor -upgrading to- Corsair K70 cherry red / Razer Naga Hex / Korean 27" IPS from ebay.

Sorry for shitty light

Hey man ur PC is basically the same thing as the 1 i am building!!! NICE

- - - Updated - - -

My pride and joy! Have cleaned up the wiring prior to booting, actually very pleased with the ease of wiring in this case!

I just got that keyboard the razer deathstalker do u like it?

[Majesticii]

Looks really good Majesticii. Looking forward to better pictures that will do the build justice.

You should keep the fan in pull to be honest (I assume that's how you've got it atm). It makes it a lot easier to clean and the performance (cooling) between push and pull is negligible. You could add a fan shroud if you really want the extra cooling performance.

I like the sleeving too; good job! If I had to nit-pick it would be the colour-coded PSU connectors. Dismantle them and spray-paint them black or white!

Thanks for the words or praise ^^.
And yeah, i might just order some black connectors and replug the connectors.

[inux94]

Just realized I never posted my Haswell rig on this thread



Specifications
CPU: Intel i5-4570k: @ Stock clock w/ NH-U14s CPU cooler
Motherboard: Gigabyte GA-Z87X-OC
RAM: 8x8GB Kingston HyperX Black @ 1600MHz
GPUs: ASUS GTX 670 DCUII & Gigabyte 670 WindForce in SLI
Soundcard: ASUS Xonar Essence STX
SSD's: Kingston 128GB boot drive & Crucial M4 256GB storage drive
Power Supply: XFX ProSeries 750w
Case fans: Noctua NF-F14 140mm fans with low noise adapter

Peripherals
Mouse: Logitech G400s
Mousepad: Logitech mousepad from the Logitech booth at Dreamhack
Laptop Mousepad: Mionix Sargas 900
Keyboards: 2x CM Storm Quickfire Rapid for both my desktop & laptop
Main Monitor: Achieva Shimian 2560x1440 monitor
Secondary monitors: ASUS MW221U 2x & Xerox XM7-22w 1680x1050 monitors

As you might have guessed by now, it's a silence focused rig which I love. The temperatures a little high with low fan speeds but at load I can still barely hear the rig running.



Horrible chairs to use for prolonged use, but I've ordered 2x of the Ikea MALKOLM chairs, which should arrive with ship within the next few months

[BicycleMafioso]

Such a cable-fest! I like the Kingston-heads and the turret.
I guess the left keyboard setup is for a different computer?

[inux94]

The left keyboard is for my laptop, I use the 21.5" Samsung Monitor for when my friends come over and want to game.

[Hellravager]

Will be posting mine here just gotta find my phone

[Deleted]

Just realized I never posted my Haswell rig on this thread

Nice setup, glad to see you're getting new chairs

Will be posting mine here just gotta find my phone

Call it.

[DeltrusDisc]

Inux.

Upgrade your chair damn it!

[Majesticii]

-outdated-

[Lemmiwink]

Very nice an tidy build Majesticii. A bit off on the color coordination, but I kinda like the color scheme still. Good job

[BicycleMafioso]

A shame about the ASRock motherboard, the brown comes sort of out of nowhere

[Majesticii]

Well, Z87M colorschemes aren't that great to begin with. And i picked the board because of the onboard audio mostly.