MMO-Champion Overclocking Leaderboards

[Sephiracle]

Done. That was really intricate and annoying work. T.T Message me with any errors. Also, there are a few people I didn't even bother with. Those would be the people who can't follow format.

Thanks for the update fuzzy. I'll make sure to try 5 again soon so you can reupdate it :P

[DeltrusDisc]

1.15v is really creeping up on the VCCIO (VTT). I'd contact your RAM manufacturers and see if the RAM will operate properly on 1.5v (some will, some won't). If they say yes, I'd try RAM at 1.5v and VCCIO at 1.10v or so.

But but! My timings and frequencies! D:

[brennin]

Name: Mike
Processor: i5 2500k
Clock: 4489.8 (stock 3.3ghz)
Voltage: Auto
Cooler: Arctic Cooling Freezer 13 pro CPU Cooler
Screenshot: http://imageshack.us/f/189/94364433.png/
CPU-Z: http://valid.canardpc.com/show_oc.php?id=1975191

[OmnitronDefenseSystem]

Higher voltage definitely would contribute to higher temps. Do you know what your CPU's temps are typically?

About 48-52 c playing wow, 34 idle

[Asmekiel]

Here I am sitting at those extra 0.1 GHz and boy do they make a difference. WHEW! The internets is so fast that I need a slower web browser in order to cope

When you overclock and mind your voltage, what's your load line calibration set to?

Just checked.. auto tbh, I don't exactly know what it does, so I left it there.

[Spasx]

Name: ETHAN-PC
Processor: AMD Phenom II X4 965 (125w TDP)
Clock: 3.8Ghz
Voltage: 1.425 in BIOS and 1.424 in CPU-Z
Cooler: Coolermaster Hyper 212+
Screenshot LINK: http://imageshack.us/photo/my-images/52/proofvn.png/
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=1975219

[DeltrusDisc]

Name: DeltrusDisc
Processor: i5-2500K
Clock: 4.5GHz
Voltage: 1.35V in BIOS
Cooler: Zalman CNPS 9900
Screenshot LINK: http://imageshack.us/photo/my-images...me95hourr.png/
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=1975205

I think I still have some headroom to OC some more. :3

[Rixis]

keep pushing it till it doesn't work, then drop it back a bit

[Ai]

Does it count if I turn off cores and or HT?
I'll post the max I can get out of my chip after work today also.

[Ghâzh]

Does it count if I turn off cores and or HT?
I'll post the max I can get out of my chip after work today also.

Isn't it the usual 'precaution' to disable HT before overclocking anyway? Don't think turning off cores is allowed though .

And holy crap I made it to the lists. Next step is to get to 4,4GHz which is the lowest sandy bridge at the moment.

[Wries]

Isn't it the usual 'precaution' to disable HT before overclocking anyway?

No, not really. Exception is for super-high overclocks as by some point the increased effectiveness per core will make instability come easier.

[Fuzzykins]

Please don't post work in progresses. If you're going to post, post. If not, don't edit your post later, as I cant watch every post in this thread,

[Sephiracle]

Please don't post work in progresses. If you're going to post, post. If not, don't edit your post later, as I cant watch every post in this thread,

ehhh I decided against making a thread about it, sorry, I'll remove the post.

[Twiistz]

Name: Twiistz
Processor: Intel Core i7 2600K
Clock: 4700 Mhz
Voltage: 1.336 V
Cooler: Noctua NH-D14
Screenshot LINK: http://i.imgur.com/fUTEc.jpg
Valid CPU-Z link:

First time overclocking a CPU, pretty happy so far. Going to try lower the voltage later tonight.

[Wries]

Name: Twiistz
Processor: Intel Core i7 2600K
Clock: 4700 Mhz
Voltage: 1.336 V
Cooler: Noctua NH-D14
Screenshot LINK: http://i.imgur.com/fUTEc.jpg
Valid CPU-Z link:

First time overclocking a CPU, pretty happy so far. Going to try lower the voltage later tonight.

That is a pretty darn low voltage for 4.7. Does it hold up in say 30 runs of intel burn test as well? (version 2.52, not 2.3 with the old linpacks)

[Sephiracle]

That is a pretty darn low voltage for 4.7. Does it hold up in say 30 runs of intel burn test as well? (version 2.52, not 2.3 with the old linpacks)

In that screen his temps are hardly at the max reported by RealTemp, so it might be a little higher under load. It's still a probably a pretty good voltage, but I don't think the cpu is actually at it's max voltage according to the screen.

[Twiistz]

In that screen his temps are hardly at the max reported by RealTemp, so it might be a little higher under load. It's still a probably a pretty good voltage, but I don't think the cpu is actually at it's max voltage according to the screen.

It set the CPU Voltage in BIOS to 1,34 V. Im not that much into overclocking, so I don't know why its lower.
Anyways as we speak, im doing another P95 test with CPU Vcore, at 1,325 V.

[Sephiracle]

It set the CPU Voltage in BIOS to 1,34 V. Im not that much into overclocking, so I don't know why its lower.
Anyways as we speak, im doing another P95 test with CPU Vcore, at 1,325 V.

Cool, let us know your results, seems like you have a good chip.

[Bigdunka]

Name: Bigdunka
Processor: Intel Core i7-2600K
Clock: 4815 MHz
Voltage: 1.432V
Cooler: CyberPower Xtreme Hydro Liquid Cooling Kit 360MM w/ Triple Fan
Screenshot LINK: http://imageshack.us/photo/my-images/268/stressy.jpg/
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=1976490

[Sephiracle]

Name: Bigdunka
Processor: Intel Core i7-2600K
Clock: 4815 MHz
Voltage: 1.44V
Cooler: CyberPower Xtreme Hydro Liquid Cooling Kit 360MM w/ Triple Fan
Screenshot LINK: http://imageshack.us/photo/my-images/5/stressz.jpg/
Valid CPU-Z link: http://valid.canardpc.com/show_oc.php?id=1976468

"Torture Test completed 0 tests in 0 minutes"