Help, BSOD

[ezpz]

My computer recently is randomly blue screening and I feel like its my overclocking. However, I ran a full 24-hour prime stress test and it was successful.

My computer specs:
Mother board: p7p55d-e lx
CPU: i7-860 2.8ghz OC'd to 3.5 core voltage at 1.25
Ram: 2x4gb ddr3 1600 ram lowered to 1350~
GFX: gts 250 1gb
OS: windows 7- 64bit

And cooling is adequate. My idle temp's are 40-45 depending on which core.

Error message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Any idea what this means? thank you for your time.

[Deleted]

I might have missed it, but do you mind posting the BSOD error code?

It's most likely your OC causing it. Even if you ran a 24 hour Prime95, it can still BSOD in other programs. I'd suggest running another stress test application and see. It might also be caused by faulty drivers (very common) so check GPU drivers and such - basically anything that you have been updating/changing since the BSOD started.

[ezpz]

Is there a way I can check after I closed the box from microsoft that gave me all the previous info? :\

[taekvideo]

When you actually get the blue screen there should be an error code on it. Keep a pencil/paper around so you can quickly jot it down the next time it happens.

EDIT:
This guide explains some other ways you might be able to look it up.
http://www.bleepingcomputer.com/forums/topic74712.html

[Deleted]

Here are some common BSOD codes related to overclocking:

BDOS CODES:
Here is a list of Common BDOS Errors and what to do to get rid of them; these suggestions are from trial and error, and many BDOSes from hundreds of hours of overclocking. I have gotten many of these BDOSes and checked them out (tried to cause them) and I have modified that list, here it is.
BSOD Codes
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage

Taken from: http://www.overclock.net/intel-gener...uide-p67a.html