Last edited by mmocba105e19de; 2013-01-11 at 06:56 AM.
Really like it. The raid frames pop and would really stand out for a healer role. As always good work.
PS. Who cares about the font, if you like it use it.
PPs. Please keep posting screenshots. You are 1 of the many here who've given me some great ideas and, with out knowing, tips on a good clean ui.
With regards to ElvUI, anyone know how to remove hide all the buffs/debuffs except for boss specific crap like amber-shaper destabilize stacks
I don't know the specifics for every little thing to check and uncheck but.
(assuming you mean for the target frame)
/ec -> unitframes -> target -> debuffs
Then this is where i get confused about auras filtering and probably why i never have bothered with it. I "think" you cant to block everything but whitelist and at the very bottom select "RaidDebuffs" in the Additional Filters.
You can see what auras the RaidDebuff whitelist will show via unitframes -> filters -> select filter "RaidDebuffs" -> Filter Type "Whitelist" -> select spell dropdown menu.
I could be WAY off on all this. I think there is a pretty big thread on the TukUI/ElvUI forums how to config auras that might offer better more accurate help than this though since i could be 100% wrong.
***edit***
BTW interesting approach with your new layout. The chat placement is interesting and i could see that working well if done right. Hope to see your finalized screenie soon!
Last edited by bOOURNS; 2013-01-11 at 03:48 AM.
Seeing that I'm not the only one that thinks that the font does not fit the rest of the UI, you might want to lay off the hostile attitude and just play around with some different fonts? Because I'm not saying your UI is bad, just that it would look better with a different font.
I use a 27" screen too and it's not about it being too large or small, it's the general look. Pixel fonts also have a specific size at which they look good, and you are not using that one so they have blurred edges and look really fuzzy/blurry. So maybe just take the advice and try something new. Nobody here hates you and wants you to stop posting. I could imagine that something like BigNoodleTitling or a lowercase version of myriad would look good on your ui.Everyone seems to bitch about my font. I think I'm just going to give up posting screenshots cause of this. The font looks just fine on my screen size and resolution. My screen is a 27" so what looks large for probably most people is pretty small on my screen.
Either way, I'm done with screenshots.
I'm well aware pixel fonts have to be a specific size(I spent days trying out 50+ fonts and this was the ONLY one that worked on my screen) and I am using the correct size for the font I've picked out. Because it is NOT fuzzy or blurry at all on my screen or in my screenshots. Are you even left clicking one time after loading the image so it zooms in to "actual size" and not the defaulted "fit to screen"? You're the only one who thinks it's blurry.
Oh okay. I cant really seem to be able to customise the looks of Tidy Plates at all except by changing the built in Layouts. Only things I can change is what information they show and even that is very limited. Also there are no profiles with it which is a shame. I would prefer just to go back to Aloft but still be able to have the debuff icons over the top of the nameplates ability.
Not sure what I'm doing wrong with Tidy Plates then :/
Also here is my UI on my Death Knight that I am currently leveling up:
Using ElvUI as base, its just the regular raid icon from the Elv raid frames.
---------- Post added 2013-01-11 at 03:03 PM ----------
Really enjoyed using MayronUI Gen2, only issues I had were some lua errors. shoulda taken note of what they were tho so I could have let you know.
I really need a bigger monitor tho, so i can get more screen real estate
---------- Post added 2013-01-11 at 03:13 PM ----------
I was a bit out of it last night, completely forgot to check Tuk/Elv Forums....
Could use some C&C on those screens to give me some more ideas, not sure what to do with it now...got a sort of writers block atm :P UIBLOCK!
What about either remove one row of action bars on each side of the chat so you have 12 on top and 6 on each side? Or have 12 on top, 6 on each side and 12 on the bottom. Maybe move the whole chat/action bar mix down a bit so it aligns with your minimap, Party/raid frames.
Also, is that nibEclipse? If so you should mess around with size to make that border nice and crisp instead of the blurry mess you have now.
Will have a move around see what I come up with, with regards to the cast bars, do you mean like 2 lines say with target and player cast bars running along the top of chat/bar 1 like ========= <-- this kinda hard to describe.
Raid Screenshot (dk alt in LFR)
---------- Post added 2013-01-11 at 07:05 PM ----------
Its Balance Power Tracker, was messing around with it to try and get a nice clean border, didn't manage it, this is WIP atm, will chuck a different texture into the BPT folder to try and sharpen it up
Edit: Do you mean like this for cast bars / moving chat/ab's down?
Last edited by mmocba105e19de; 2013-01-11 at 08:04 PM.
Like if you moved you chat and action bars down to align the bottom of all that to match the raid frames and map there will be plenty space made(where the main actionbar is now) to place one or two castbars and match those to the width of the main actionbar if that makes sense.
Kinda like in my UI my player cast is above my raid frames with the width matched and my target cast is above that matching the width of my player+portrait+target frames.
This is all just suggestions as I think if the actionbar+chat is shifted down you'll have a huge hole between the new location and you unit frames, making it a nice spot to fill with castbars.
But play around and experiment. Even when I get things looking how I like I almost always keep playing around just to see and maybe get some creative ideas and find something I never thought of.
Last edited by bOOURNS; 2013-01-11 at 07:28 PM.
Made myself a new more functional UI, still the same layout tho.
Target debuffs + my important buffs (Rapid fire in this case), castbar and bar 2 to the right which pops up when entering combat
Enemy castbar + focus
Raid with BW, boss frames etc
Does anyone have any ideas on how to add a border to bigwigs timers? Want the same border on them that i use for the rest of the UI (fer09).
To bad there ain't an option for it, heck, you can't even anchor/parent a KGpanel to them
Last edited by mmocf4ab73a1dd; 2013-01-12 at 12:01 AM.
Took me a whooping 3 minutes to do that.
Open up ingame options, Eclipse Bar, Bar Options, check Show Border, select a bar texture (any will work, even the blizzard ones), change border size to make a nice looking border (I used Blizzard Dialog at the size 2). Then go to Color and change the border color to black.
Now then, the problem is that the border is outside the bar itself. For this you'll have to go into the SavedVariables lua and change insets to 1. Don't forget to exit the game first!
Kablamo, you've got yourself a nice 1px border!Code:["eclipse_bar"] = { ["showInAllStances"] = false, ["ly"] = 0, ["insets"] = { ["top"] = 1, ["right"] = 1, ["left"] = 1, ["bottom"] = 1,
One more thing I noticed. Height and Width has to be even numbers otherwise the border won't show at all after doing this. So Width at 200 works, 201 doesn't.
Last edited by TellyTop; 2013-01-11 at 09:52 PM. Reason: Added code and more steps on the way to 1px border