just use
thats gonna keep it from trying to cast @ the bolt once the bolt is dead, it won't actually switch your target to the boltCode:#show /use [@Elementium Bolt, nodead][] Pyroblast
also I think if you set it as your focus when its flying in and then /Tar focus it might work. I think the focus will drop off after it dies (can't remember if it drops off immediately though)
---------- Post added 2012-02-27 at 10:03 AM ----------
for a dps rotation you could use a castsequence macro
/castsequence reset=target/combat
something like that
also if you question is in response to the marking macro posted then i'm not sure. i'm not as good with script macros, but I think there has to be a way to have it reset after 1 second of idle or something (reset=1 or something)
The macro posted above won't work due to not being assigned a UnitID.
You have a good idea though. Try something like this.
Code:#showtooltip /focus Twilight Sapper /focus Elementium Bolt /cast [@focus,harm,nodead][]Pyroblast /clearfocus [dead]
Gershuun @ Borean Tundra US - Interface & Macros Moderator
I'm leveling a warrior and would like to have Charge and Intercept on the same button.
I tried the simple
/cast Charge
/cast Intercept
But it just ended up using both if they were both off CD. Any help?
They're both on the GCD, so they cannot be macro'd like that. It will always try to use Charge, no matter the CD. You'll need to assign conditions, when you want to use which spell (I don't play a warrior and know surprisingly little, but iirc charge can't be used in combat, so my proposition:
Code:/cast [nocombat] Charge; Intercept
I'm looking for a Feral druid macro for CC. I run 3s and wish to set up 3 seperate macros for each arena target...in each individual macro, id like it to cast cyclone at arena1 with no mod. with shift mod id like it to cast entangling roots on arena1, and with ctrl mod id like it to cast hibernate. I found one on arena junkies website but all it does is cast cyclone...can anybody help me? this is what the arenajunkies macro looks like that doesnt work
/cast [@arena1] Cyclone
/cast [@arena1,modifier:shift] Entangling Roots
/cast [@arena1,modifier:ctrl] Hibernate
EDIT: as i said earlier, i wanted to make 3 different macros. each macro would be in charge of a certain arena target. arena1,arena2, and arena3.
EDIT2: I was going through some of my other macros and i think i have found a way to do this. Can somebody doublecheck this to make sure it looks okay? I will be replacing "arena1" with "arena2" and "arena3" for my other macros....but here it is...btw, im VERY new to macros.
/cast [nomod, target=arena1] Cyclone; [mod: shift, target=arena1] Entangling Roots; [mod: ctrl, target=arena1] Hibernate;
Last edited by Aquaux; 2012-03-01 at 04:55 AM.
I want a macro like:
#showtooltip Hymn of Hope
/5 >>Hymn of Hope<<
/cast Hymn of Hope
How would I prevent the macro from spamming chat? Do I add an '!' somewhere?
There is a way to make a /run command that starts a stopwatch when you do /5 HoH once, and then prevents it from being spammed for a certain amount of time. It's on the last pages somewhere, maybe I can find it for you.
But anyway, for these purposes, RSA (a spell announcer addon) is very suitable as well.
---------- Post added 2012-03-02 at 10:41 AM ----------
Here it is:
Go along those lines. obviously, replace Mind Control with what you're using, and replace [help] with [harm] if you're using the macro for a helpful spell.
And make sure you use a different variable time (change the two SAYTIME) for every macro.
Are you posting it to the custom channel number "5" or after 5 seconds, either way RSA or the macro above can help respectively.
Gershuun @ Borean Tundra US - Interface & Macros Moderator
Yeah, channel 5 for healer chat. I will try that addon you linked though! Thanks
hey guys, i was wondering if it was possible to make a macro with a /s line in it thats spammable but only says the /s line once, thanks in advance
this is the macro that I have
#showtooltip Revenge
/startattack
/cast Revenge
/cast Heroic Strike
all I need is that the Heroic Strike not run if the rage is below 40, something like:
#showtooltip Revenge
/startattack
/cast Revenge
/cast [not run if rage is below 40] Heroic Strike
thanks for your time and answers
Last edited by Ascendant; 2012-03-04 at 08:32 AM.
"once" is hard to define in terms of macros. But there is a way to suppress it being said for a given amount of time. I'll just quote some macro gurus and myself:
Or you use this addon:
---------- Post added 2012-03-04 at 03:39 PM ----------
To put it more precisely and nicely, the things a macro can base decisions on are very limited.
A macro cannot detect nor make decisions based on anything like cooldowns, (non)presence of (de)buffs, mana/rage/energy levels, combo points and alike.
Last edited by mmocdd8e41448a; 2012-03-04 at 02:41 PM.
I'm looking for a macro that does the following;
I would like it to cast Heroic Strike when I'm in actionbar page 1, and Cleave when I'm in actionbar page 2.
Is that possible?
Warlock (SL main)